diff options
Diffstat (limited to 'ubi-utils/scripts')
| -rw-r--r-- | ubi-utils/scripts/Makefile | 91 | ||||
| -rw-r--r-- | ubi-utils/scripts/README | 14 | ||||
| -rw-r--r-- | ubi-utils/scripts/bin2nand2bin_test.sh | 216 | ||||
| -rw-r--r-- | ubi-utils/scripts/f128_nand_sample.cfg | 38 | ||||
| -rw-r--r-- | ubi-utils/scripts/f64_nor_sample.cfg | 39 | ||||
| -rw-r--r-- | ubi-utils/scripts/inject_biterror.pl | 94 | ||||
| -rw-r--r-- | ubi-utils/scripts/pdd.txt | 16 | ||||
| -rwxr-xr-x | ubi-utils/scripts/run_all.sh | 101 | ||||
| -rw-r--r-- | ubi-utils/scripts/test.cfg | 23 | ||||
| -rwxr-xr-x | ubi-utils/scripts/ubi_test.sh | 328 | ||||
| -rwxr-xr-x | ubi-utils/scripts/ubi_tools_test.sh | 252 | ||||
| -rw-r--r-- | ubi-utils/scripts/ubicrc32.pl | 74 | ||||
| -rw-r--r-- | ubi-utils/scripts/unubi_test.sh | 105 |
13 files changed, 0 insertions, 1391 deletions
diff --git a/ubi-utils/scripts/Makefile b/ubi-utils/scripts/Makefile deleted file mode 100644 index b8e3c96..0000000 --- a/ubi-utils/scripts/Makefile +++ /dev/null @@ -1,91 +0,0 @@ -# -# Makefile -# -# Testcase for UBI pfi update. -# -# Author: Frank Haverkamp <haverkam@de.ibm.com> -# - -card = test -mkpfi_cfg = test.cfg - -# -# Some default values you might want to overwrite. Try it if you need -# it and add more if needed. Note that no real sanity checking is done -# on those values. If you do it wrong your card has no valid PDD data. -# - -PATH := $(PATH):/opt/ppc/usr/bin:../perl:.. - -dd = dd -sed = sed -bin2nand = bin2nand -ubigen = ubigen -mkpfi = mkpfi -v -pfi2bin = pfi2bin -v - -vmlinux_bin ?= test_vmlinux.bin -rootfs_bin ?= test_rootfs.bin -spl_bin ?= test_u-boot.bin -pdd_txt ?= pdd.txt - -flashtype ?= nand -pagesize ?= 2048 - -compl ?= $(card)_complete -compl_pfi ?= $(compl).pfi -compl_img ?= $(compl).img - -compl_nand2048_mif=$(compl).$(flashtype)$(pagesize).mif -compl_nand2048_img=$(compl).$(flashtype)$(pagesize).img - -all: help - -help: - @echo "Testcases for the UBI/NAND manufacturing tool-chain" - @echo "---------------------------------------------------------------" - @echo " make mif_test - Generate a mif (manufacturing " - @echo " image file)." - @echo " make bin2nand2bin_test - Create binary with ECC information" - @echo " in the OOB area. Test ECC generation" - @echo " and correction." - -mif_test: $(compl_pfi) $(compl_nand2048_mif) - -bin2nand2bin_test: - chmod a+x ./bin2nand2bin_test.sh - chmod a+x ./inject_biterror.pl - ./bin2nand2bin_test.sh - -$(compl_pfi): $(vmlinux_bin) $(rootfs_bin) $(spl_bin) - $(mkpfi) -c $(mkpfi_cfg) - -# Binary data and out of band data (OOB) -# -$(compl_nand2048_mif): $(compl_img) - $(bin2nand) -p $(pagesize) -o $(compl_nand2048_mif) $< - -# Binary data only -# -$(compl_img): $(compl_pfi) - $(pfi2bin) -j $(pdd_txt) -o $@ $< - -# -# Default data -# -# If the binary data is not available in the current working directory -# we try to create symlinks to our test data. -# -$(vmlinux_bin) $(rootfs_bin) $(spl_bin): - @echo - @echo "No $@ found, will use defaults !" - @echo - @echo "OR press CTRL-C to provide your own $@" && \ - sleep 1 && \ - $(dd) if=/dev/urandom of=$@ bs=1M count=1 - -clean: - $(RM) *.pfi *~ testblock* oob.bin - -distclean: clean - $(RM) *.bin *.mif *.oob *.img diff --git a/ubi-utils/scripts/README b/ubi-utils/scripts/README deleted file mode 100644 index 01c7453..0000000 --- a/ubi-utils/scripts/README +++ /dev/null @@ -1,14 +0,0 @@ -README -====== - -This procedure creates a test pfi which should be flashed to our -system with pfiflash. The testcase should read the data back and -compare with the original. - -We should try not forget to run these tests before we release -a new version of UBI. - -Frank - -Please guys, clean up this and move the tests to mtd-utils/tests/ -Artem. diff --git a/ubi-utils/scripts/bin2nand2bin_test.sh b/ubi-utils/scripts/bin2nand2bin_test.sh deleted file mode 100644 index 51f048c..0000000 --- a/ubi-utils/scripts/bin2nand2bin_test.sh +++ /dev/null @@ -1,216 +0,0 @@ -#!/bin/sh -# -# Version: 1.1 -# Author: Frank Haverkamp <haver@vnet.ibm.com> -# -# Testcase for nand2bin and bin2nand. Generate testdata and inject -# biterrors. Convert data back and compare with original data. -# -# Conversion: -# bin -> bin2nand -> mif -> nand2bin -> img -# - -inject_biterror=./inject_biterror.pl -pagesize=2048 -oobsize=64 - -# Create test data -dd if=/dev/urandom of=testblock.bin bs=131072 count=1 - -for layout in IBM MTD ; do - echo "*** Simple test with $layout layout ..." - - echo -n "Convert bin to mif ... " - bin2nand -l$layout --pagesize=${pagesize} -o testblock.mif testblock.bin - if [ $? -ne "0" ]; then - echo "failed!" - exit 1 - else - echo "ok" - fi - - echo -n "Convert mif to bin ... " - nand2bin -l$layout --pagesize=${pagesize} -o testblock.img testblock.mif - if [ $? -ne "0" ]; then - echo "failed!" - exit 1 - else - echo "ok" - fi - - echo -n "Comparing data ... " - diff testblock.bin testblock.img - if [ $? -ne "0" ]; then - echo "failed!" - exit 1 - else - echo "ok" - fi -done - -echo "*** Test conversion without bitflips ..." - -echo -n "Convert bin to mif ... " -bin2nand --pagesize=${pagesize} -o testblock.mif testblock.bin -if [ $? -ne "0" ]; then - echo "failed!" - exit 1 -else - echo "ok" -fi - -echo -n "Convert mif to bin ... " -nand2bin --pagesize=${pagesize} -o testblock.img testblock.mif -if [ $? -ne "0" ]; then - echo "failed!" - exit 1 -else - echo "ok" -fi - -echo -n "Comparing data ... " -diff testblock.bin testblock.img -if [ $? -ne "0" ]; then - echo "failed!" - exit 1 -else - echo "ok" -fi - -echo "*** Test conversion with uncorrectable ECC erors ..." -echo -n "Inject biterror at offset $ioffs ... " -${inject_biterror} --offset=0 --bitmask=0x81 \ - --input=testblock.mif \ - --output=testblock_bitflip.mif -if [ $? -ne "0" ]; then - echo "failed!" - exit 1 -else - echo "ok" -fi - -echo "Convert mif to bin ... " -rm testblock.img -nand2bin --correct-ecc --pagesize=${pagesize} -o testblock.img \ - testblock_bitflip.mif -if [ $? -ne "0" ]; then - echo "failed!" - exit 1 -else - echo "ok" -fi - -echo -n "Comparing data, must fail due to uncorrectable ECC ... " -diff testblock.bin testblock.img -if [ $? -ne "0" ]; then - echo "ok" # Must fail! -else - echo "failed!" - exit 1 -fi - -echo "*** Test bitflips in data ... " -for offs in `seq 0 255` ; do - - cp testblock.mif testblock_bitflip.mif - - for xoffs in 0 256 512 768 ; do - let ioffs=$offs+$xoffs - - cp testblock_bitflip.mif testblock_bitflip_tmp.mif - echo -n "Inject biterror at offset $ioffs ... " - ${inject_biterror} --offset=${ioffs} --bitmask=0x01 \ - --input=testblock_bitflip_tmp.mif \ - --output=testblock_bitflip.mif - if [ $? -ne "0" ]; then - echo "failed!" - exit 1 - else - echo "ok" - fi - done - - echo "Convert mif to bin ... " - rm testblock.img - nand2bin --correct-ecc --pagesize=${pagesize} -o testblock.img \ - testblock_bitflip.mif - if [ $? -ne "0" ]; then - echo "failed!" - exit 1 - else - echo "ok" - fi - - echo -n "Comparing data ... " - diff testblock.bin testblock.img - if [ $? -ne "0" ]; then - hexdump testblock.bin > testblock.bin.txt - hexdump testblock.img > testblock.img.txt - echo "Use tkdiff testblock.bin.txt testblock.img.txt to compare" - echo "failed!" - exit 1 - else - echo "ok" - fi - - # Without correction - echo "Convert mif to bin ... " - rm testblock.img - nand2bin --pagesize=${pagesize} -o testblock.img \ - testblock_bitflip.mif - if [ $? -ne "0" ]; then - echo "failed!" - exit 1 - else - echo "ok" - fi - - echo -n "Comparing data must differ, correction is disabled ... " - diff testblock.bin testblock.img - if [ $? -ne "0" ]; then - echo "ok" # must fail - else - echo "failed!" - exit 1 - fi -done - -echo "*** Test bitflips in OOB data ... " -for offs in `seq 0 $oobsize` ; do - - let ioffs=$pagesize+$offs - - echo -n "Inject biterror at offset $ioffs ... " - ${inject_biterror} --offset=${ioffs} --bitmask=0x01 \ - --input=testblock.mif \ - --output=testblock_bitflip.mif - if [ $? -ne "0" ]; then - echo "failed!" - exit 1 - else - echo "ok" - fi - - echo "Convert mif to bin ... " - rm testblock.img - nand2bin --correct-ecc --pagesize=${pagesize} -o testblock.img \ - testblock_bitflip.mif - if [ $? -ne "0" ]; then - echo "failed!" - exit 1 - else - echo "ok" - fi - - echo -n "Comparing data ... " - diff testblock.bin testblock.img - if [ $? -ne "0" ]; then - hexdump testblock.bin > testblock.bin.txt - hexdump testblock.img > testblock.img.txt - echo "Use tkdiff testblock.bin.txt testblock.img.txt to compare" - echo "failed!" - exit 1 - else - echo "ok" - fi -done diff --git a/ubi-utils/scripts/f128_nand_sample.cfg b/ubi-utils/scripts/f128_nand_sample.cfg deleted file mode 100644 index bb62600..0000000 --- a/ubi-utils/scripts/f128_nand_sample.cfg +++ /dev/null @@ -1,38 +0,0 @@ -[targets] -complete=ipl,spl,bootenv,kernel,rootfs -bootcode=spl,bootenv - -# Build sections -[ipl] -image=ipl.bin -raw_starts=0x00000000 -raw_total_size=128kiB - -[spl] -image=u-boot.bin -ubi_ids=2,3 -ubi_size=2MiB -ubi_type=static -ubi_names=spl_0,spl_1 - -[bootenv] -bootenv_file=bootenv_complete.txt -ubi_ids=4,5 -ubi_size=128kiB -ubi_type=static -ubi_names=bootenv_0,bootenv_1 - -[kernel] -image=vmlinux.bin -ubi_ids=6,7 -ubi_size=6MiB -ubi_type=static -ubi_names=kernel_0,kernel_1 - -[rootfs] -image=rootfs.bin -ubi_ids=8,9 -ubi_alignment=2kiB -ubi_size=16MiB -ubi_type=dynamic -ubi_names=rootfs_0,rootfs_1 diff --git a/ubi-utils/scripts/f64_nor_sample.cfg b/ubi-utils/scripts/f64_nor_sample.cfg deleted file mode 100644 index 889d4c2..0000000 --- a/ubi-utils/scripts/f64_nor_sample.cfg +++ /dev/null @@ -1,39 +0,0 @@ -[targets] -complete=ipl,spl,bootenv,kernel,rootfs -bootcode=spl,bootenv -rootfs=rootfs - -# Build sections -[ipl] -image=ipl.bin -raw_starts=0x02FE0000, 0x03FE0000 -raw_total_size=128kiB - -[spl] -image=u-boot.bin -ubi_ids=2,3 -ubi_size=2MiB -ubi_type=static -ubi_names=spl_0,spl_1 - -[bootenv] -bootenv_file=bootenv_complete.txt -ubi_ids=4,5 -ubi_size=128kiB -ubi_type=static -ubi_names=bootenv_0,bootenv_1 - -[kernel] -image=vmlinux.bin -ubi_ids=6,7 -ubi_size=6MiB -ubi_type=static -ubi_names=kernel_0,kernel_1 - -[rootfs] -image=rootfs.bin -ubi_ids=8,9 -ubi_alignment=2kiB -ubi_size=16128kiB -ubi_type=dynamic -ubi_names=rootfs_0,rootfs_1 diff --git a/ubi-utils/scripts/inject_biterror.pl b/ubi-utils/scripts/inject_biterror.pl deleted file mode 100644 index b4a862a..0000000 --- a/ubi-utils/scripts/inject_biterror.pl +++ /dev/null @@ -1,94 +0,0 @@ -#!/usr/bin/perl -w -# -# 2007 Frank Haverkamp <haver@vnet.ibm.com> -# -# Program for bit-error injection. I am sure that perl experts do it -# in 1 line. Please let me know how it is done right ;-). -# - -use strict; -use warnings; -use Getopt::Long; -use Pod::Usage; - -my $i; -my $help; -my $result; -my $offset = 0; -my $bitmask = 0x01; -my $in = "input.mif"; -my $out = "output.mif"; - -$result = GetOptions ("offset=i" => \$offset, # numeric - "bitmask=o" => \$bitmask, # numeric - "input=s" => \$in, # string - "output=s" => \$out, # string - "help|?" => \$help) or pod2usage(2); - -pod2usage(1) if $help; - -my $buf; - -open(my $in_fh, "<", $in) - or die "Cannot open file $in: $!"; -binmode $in_fh; - -open(my $out_fh, ">", $out) or - die "Cannot open file $out: $!"; -binmode $out_fh; - -$i = 0; -while (sysread($in_fh, $buf, 1)) { - - $buf = pack('C', unpack('C', $buf) ^ $bitmask) if ($i == $offset); - syswrite($out_fh, $buf, 1) or - die "Cannot write to offset $offset: $!"; - $i++; -} - -close $in_fh; -close $out_fh; - -__END__ - -=head1 NAME - -inject_biterrors.pl - -=head1 SYNOPSIS - -inject_biterror.pl [options] - -=head1 OPTIONS - -=over 8 - -=item B<--help> - -Print a brief help message and exits. - -=item B<--offset>=I<offset> - -Byte-offset where bit-error should be injected. - -=item B<--bitmask>=I<bitmask> - -Bit-mask where to inject errors in the byte. - -=item B<--input>=I<input-file> - -Input file. - -=item B<--output>=I<output-file> - -Output file. - -=back - -=head1 DESCRIPTION - -B<inject_biterrors.pl> will read the given input file and inject -biterrors at the I<offset> specified. The location of the biterrors -are defined by the I<bitmask> parameter. - -=cut diff --git a/ubi-utils/scripts/pdd.txt b/ubi-utils/scripts/pdd.txt deleted file mode 100644 index a3ad915..0000000 --- a/ubi-utils/scripts/pdd.txt +++ /dev/null @@ -1,16 +0,0 @@ -pdd=flash_type,flash_size,flash_eraseblock_size,flash_page_size,card_serialnumber,card_type,ethaddr,eth1addr,eth0,eth1,total,card_hardwarelevel -pdd_preserve=ethaddr,eth1addr,card_serialnumber -# To be personalized -ethaddr=00:04:34:56:78:9A -eth1addr=00:04:34:56:78:9B -card_serialnumber=SN0 -# Static for this card type -total=102M -card_type=nand_driven_testcard -card_hardwarelevel=0 -eth0=bcm5222,eth0,0 -eth1=bcm5222,eth0,1 -flash_type=NAND -flash_size=0x08000000 -flash_eraseblock_size=0x00020000 -flash_page_size=0x00000800 diff --git a/ubi-utils/scripts/run_all.sh b/ubi-utils/scripts/run_all.sh deleted file mode 100755 index 040bcbd..0000000 --- a/ubi-utils/scripts/run_all.sh +++ /dev/null @@ -1,101 +0,0 @@ -#!/bin/sh - -exit_success () -{ - echo "UBI Utils Test Scripts - SUCCESS!" - exit 0 -} - -exit_failure () -{ - echo $1 - echo "UBI Utils Test Scripts - FAILED!" - exit 1 -} - -echo UBI Utils Test Scripts - -devno=$1 -logfile=temp-test-log.txt - -if test -z "$devno"; -then - echo "Usage is $0 <mtd device number>" - exit 1 -fi - -cwd=`pwd` || exit_failure "pwd failed" - -log="${cwd}/${logfile}" - -PATH=$PATH:$cwd:.. - -cat /dev/null > $log || exit_failure "Failed to create $log" - -echo "Setting up for jffs2_test.sh" | tee -a $log - -avail=`cat /sys/class/ubi/ubi${devno}/avail_eraseblocks` -size=`cat /sys/class/ubi/ubi${devno}/eraseblock_size` - -bytes=`expr $avail \* $size` - -ubimkvol -d$devno -s$bytes -n0 -Njtstvol || exit_failure "ubimkvol failed" - -mkdir -p /mnt/test_file_system || exit_failure "mkdir failed" - -mtd=`cat /proc/mtd | grep jtstvol | cut -d: -f1` - -if test -z "$mtd"; -then - exit_failure "mtd device not found" -fi - -mount -t jffs2 $mtd /mnt/test_file_system || exit_failure "mount failed" - -cd /mnt/test_file_system || exit_failure "cd failed" - -echo Running jffs2_test.sh | tee -a $log - -jffs2_test.sh >> $log 2>&1 || exit_failure "jffs2_test.sh failed" - -rm -f * - -cd $cwd || exit_failure "cd failed" - -umount /mnt/test_file_system || exit_failure "umount failed" - -ubirmvol -d$devno -n0 || exit_failure "ubirmvol failed" - -major=`cat /sys/class/ubi/ubi${devno}/dev | cut -d: -f1` - -for minor in `seq 0 32`; do - if test ! -e /dev/ubi${devno}_$minor ; - then - mknod /dev/ubi${devno}_$minor c $major $(($minor + 1)) - fi -done - -rm -f testdata.bin readdata.bin - -echo Running ubi_jffs2_test.sh | tee -a $log - -ubi_jffs2_test.sh >> $log 2>&1 || exit_failure "ubi_jffs2_test.sh failed" - -echo Running ubi_test.sh | tee -a $log - -ubi_test.sh >> $log 2>&1 || exit_failure "ubi_test.sh failed" - -for minor in `seq 0 32`; do - if test -e /sys/class/ubi/ubi${devno}/$minor; - then - ubirmvol -d$devno -n$minor || exit_failure "ubirmvol failed" - fi -done - -echo Running ubi_tools_test.sh | tee -a $log - -ubi_tools_test.sh >> $log 2>&1 || exit_failure "ubi_tools_test failed" - -rm -f $log - -exit_success diff --git a/ubi-utils/scripts/test.cfg b/ubi-utils/scripts/test.cfg deleted file mode 100644 index 0b5ec48..0000000 --- a/ubi-utils/scripts/test.cfg +++ /dev/null @@ -1,23 +0,0 @@ -[targets] -test_complete=spl,kernel,rootfs - -[spl] -image=test_u-boot.bin -ubi_ids=10,11 -ubi_size=1MiB -ubi_type=static -ubi_names=test_spl_0,test_spl_1 - -[kernel] -image=test_vmlinux.bin -ubi_ids=12,13 -ubi_size=2MiB -ubi_type=static -ubi_names=test_kernel_0,test_kernel_1 - -[rootfs] -image=test_rootfs.bin -ubi_ids=14,15 -ubi_size=2MiB -ubi_type=dynamic -ubi_names=test_rootfs_0,test_rootfs_1 diff --git a/ubi-utils/scripts/ubi_test.sh b/ubi-utils/scripts/ubi_test.sh deleted file mode 100755 index 73e4b19..0000000 --- a/ubi-utils/scripts/ubi_test.sh +++ /dev/null @@ -1,328 +0,0 @@ -#!/bin/sh -# -# UBI Volume creation/deletion/write/read test script -# -# Written in shell language to reduce dependencies to more sophisticated -# interpreters, which may not be available on some stupid platforms. -# -# Author: Frank Haverkamp <haver@vnet.ibm.com> -# -# 1.0 Initial version -# 1.1 Use ubiupdatevol instead of ubiwritevol -# - -VERSION="1.1" - -export PATH=$PATH:~/bin:/usr/local/bin:/home/dedekind/work/prj/ubi/tools/flashutils/bin/ - -UBIMKVOL=ubimkvol -UBIRMVOL=ubirmvol -UBIUPDATEVOL=ubiupdatevol - -# 128 KiB 131072 -# 256 KiB 262144 -# 512 KiB 524288 - -SIZE_512K=524288 -SIZE_1M=1310720 - -SELF=$0 -MINVOL=10 -MAXVOL=12 - -# -# To have a standardized output I define the following function to be -# used when a test was ok or when it failed. -# -failed () -{ - echo "FAILED" -} - -passed () -{ - echo "PASSED" -} - -# -# Print sucess message. Consider to exit with zero as return code. -# -exit_success () -{ - echo "SUCCESS" - exit 0 -} - -# -# Print failure message. Consider to exit with non zero return code. -# -exit_failure () -{ - echo "FAILED" - exit 1 -} - -############################################################################### -# -# START -# -############################################################################### - -fix_sysfs_issue () -{ - echo -n "*** Fixing the sysfs issue with the /dev nodes ... " - - minor=0 - major=`grep ubi0 /proc/devices | sed -e 's/\(.*\) ubi0/\1/'` - - rm -rf /dev/ubi0 - mknod /dev/ubi0 c $major 0 - - for minor in `seq 0 $MAXVOL`; do - ### echo " mknod /dev/ubi0_$minor c $major $(($minor + 1))" - rm -rf /dev/ubi0_$minor - mknod /dev/ubi0_$minor c $major $(($minor + 1)) - done - passed -} - -# delete_volume - Delete a volume. If it does not exist, do not try -# to delete it. -# @id: volume id -# -delete_volume () -{ - volume=$1 - - ### FIXME broken sysfs!!!! - if [ -e /sys/class/ubi/$volume -o -e /sys/class/ubi/ubi0/$volume -o -e /sys/class/ubi/ubi0_$volume ]; then - - echo -n "*** Truncate volume if it exists ... " - $UBIUPDATEVOL -d0 -n$volume -t - if [ $? -ne "0" ] ; then - exit_failure - fi - passed - - echo -n "*** Delete volume if it exists ... " - $UBIRMVOL -d0 -n$volume - if [ $? -ne "0" ] ; then - exit_failure - fi - passed - fi -} - -mkvol_rmvol_test () -{ - type=$1 - -### Test if volume delete on non-existing volumes fails nicely - - for i in `seq $MINVOL $MAXVOL`; do - echo "*** Delete if exist or not $i ... " - - delete_volume $i - passed - done - -### Now deleting volumes must fail - - for i in `seq $MINVOL $MAXVOL`; do - echo "*** Trying to delete non existing UBI Volume $i ... " - - $UBIRMVOL -d0 -n$i - if [ $? -eq "0" ] ; then - exit_failure - fi - passed - done - -### Test if volume creation works ok - - for i in `seq $MINVOL $MAXVOL`; do - echo "*** Creating UBI Volume $i ... " - echo " $UBIMKVOL -d0 -n$i -t$type -NNEW$i -s $SIZE_512K" - - $UBIMKVOL -d0 -n$i -t$type -N"NEW$i" -s $SIZE_512K - if [ $? -ne "0" ] ; then - exit_failure - fi - passed - done - -### Now deleting volumes must be ok - - for i in `seq $MINVOL $MAXVOL`; do - echo "*** Trying to delete UBI Volume $i ... " - - $UBIRMVOL -d0 -n$i - if [ $? -ne "0" ] ; then - exit_failure - fi - passed - done - -### Now allocate too large volume - - echo -n "*** Try to create too large volume" - $UBIMKVOL -d0 -n$MINVOL -t$type -N"NEW$MINVOL" -s 800000000 - if [ $? -eq "0" ] ; then - exit_failure - fi - passed -} - -# writevol_test - Tests volume creation and writing data to it. -# -# @size: Size of random data to write -# @type: Volume type static or dynamic -# -writevol_test () -{ - size=$1 - type=$2 - - echo "*** Write volume test with size $size" - -### Make sure that volume exist, delete existing volume, create new - - delete_volume $MINVOL - - echo -n "*** Try to create volume ... " - $UBIMKVOL -d0 -n$MINVOL -t$type -N"NEW$MINVOL" -s $SIZE_1M - if [ $? -ne "0" ] ; then - exit_failure - fi - passed - -### Try to create same volume again - echo -n "*** Try to create some volume again, this must fail ... " - $UBIMKVOL -d0 -n$MINVOL -t$type -N"NEW$MINVOL" -s $SIZE_1M - if [ $? -eq "0" ] ; then - exit_failure - fi - passed - -### Now create test data, write it, read it, compare it - echo -n "*** Create test data ... " - dd if=/dev/urandom of=testdata.bin bs=$size count=1 - if [ $? -ne "0" ] ; then - exit_failure - fi - passed - - echo "*** Now writing data to volume ... " - # sleep 5 - ls -l testdata.bin - echo " $UBIUPDATEVOL -d0 -n$MINVOL testdata.bin" - $UBIUPDATEVOL -d0 -n$MINVOL testdata.bin - if [ $? -ne "0" ] ; then - exit_failure - fi - passed - - if [ $type = "static" ] ; then - echo "*** Download data with cat ... " - cat /dev/ubi0_$MINVOL > readdata.bin - if [ $? -ne "0" ] ; then - exit_failure - fi - passed - else - echo "*** Download data with dd bs=1 ... " - dd if=/dev/ubi0_$MINVOL of=readdata.bin bs=$size count=1 - if [ $? -ne "0" ] ; then - exit_failure - fi - passed - - # Size 1 does not work with this test ... - # - #echo "*** Download data with dd bs=$size ... " - #dd if=/dev/ubi0_$MINVOL of=readdata2.bin bs=$size count=1 - #if [ $? -ne "0" ] ; then - # exit_failure - #fi - #passed - - #echo -n "*** Comparing data (1) ... " - #cmp readdata.bin readdata2.bin - #if [ $? -ne "0" ] ; then - # exit_failure - #fi - #passed - fi - - echo -n "*** Comparing data ... " - cmp readdata.bin testdata.bin - if [ $? -ne "0" ] ; then - exit_failure - fi - passed -} - -echo "***********************************************************************" -echo "* UBI Testing starts now ... *" -echo "* Good luck! *" -echo "***********************************************************************" - -# Set to zero if not running on example hardware -grep ubi /proc/devices > /dev/null -if [ $? -ne "0" ]; then - echo "No UBI found in /proc/devices! I am broken!" - exit_failure -fi - -# Set to zero if not running on example hardware -grep 1142 /proc/cpuinfo > /dev/null -if [ $? -eq "0" ]; then - echo "Running on example hardware" - mount -o remount,rw / / - sleep 1 - fix_sysfs_issue -else - echo "Running on Artems hardware" -fi - -echo "***********************************************************************" -echo "* mkvol/rmvol testing for static volumes ... *" -echo "***********************************************************************" - -mkvol_rmvol_test static - -echo "***********************************************************************" -echo "* mkvol/rmvol testing for dynamic volumes ... *" -echo "***********************************************************************" - -mkvol_rmvol_test dynamic - -echo "***********************************************************************" -echo "* write to static volumes ... *" -echo "***********************************************************************" - -# 10 Erase blocks = (128 KiB - 64 * 2) * 10 -# = 1309440 bytes -# 128 KiB 131072 -# 256 KiB 262144 -# 512 KiB 524288 - -for size in 262144 131073 131072 2048 1 4096 12800 31313 ; do - writevol_test $size static -done - -echo "***********************************************************************" -echo "* write to dynamic volumes ... *" -echo "***********************************************************************" -echo "VERSION: $VERSION" - -for size in 131073 131072 2048 1 4096 12800 31313 262144 ; do - writevol_test $size dynamic -done - -echo "***********************************************************************" -echo "* Congratulations, no errors found! *" -echo "* Have fun with your cool UBI system! *" -echo "***********************************************************************" - -exit_success diff --git a/ubi-utils/scripts/ubi_tools_test.sh b/ubi-utils/scripts/ubi_tools_test.sh deleted file mode 100755 index 7f121f1..0000000 --- a/ubi-utils/scripts/ubi_tools_test.sh +++ /dev/null @@ -1,252 +0,0 @@ -#!/bin/sh -# -# UBI Volume creation/deletion/write/read test script. -# Uses our flash update tools and the associated toolchain for flash -# image creation. -# -# Written in shell language to reduce dependencies to more sophisticated -# interpreters, which may not be available on some stupid platforms. -# -# Author: Frank Haverkamp <haver@vnet.ibm.com> -# -# 1.0 Initial version -# - -VERSION="1.0" - -export PATH=$PATH:~/bin:/usr/local/bin:/home/dedekind/work/prj/ubi/tools/flashutils/bin/ - -UBIMKVOL=ubimkvol -UBIRMVOL=ubirmvol -UBIWRITEVOL=ubiupdatevol -PFIFLASH=pfiflash -CMP=cmp - -MAXVOL=32 - -test_pfi=test_complete.pfi -real_pfi=example_complete.pfi - -# 128 KiB 131072 -# 256 KiB 262144 -# 512 KiB 524288 - -# -# To have a standardized output I define the following function to be -# used when a test was ok or when it failed. -# -failed () -{ - echo "FAILED" -} - -passed () -{ - echo "PASSED" -} - -# -# Print sucess message. Consider to exit with zero as return code. -# -exit_success () -{ - echo "SUCCESS" - exit 0 -} - -# -# Print failure message. Consider to exit with non zero return code. -# -exit_failure () -{ - echo "FAILED" - exit 1 -} - -############################################################################### -# -# START -# -############################################################################### - -fix_sysfs_issue () -{ - echo -n "*** Fixing the sysfs issue with the /dev nodes ... " - - minor=0 - major=`grep ubi0 /proc/devices | sed -e 's/\(.*\) ubi0/\1/'` - - rm -rf /dev/ubi0 - mknod /dev/ubi0 c $major 0 - - for minor in `seq 0 $MAXVOL`; do - ### echo " mknod /dev/ubi0_$minor c $major $(($minor + 1))" - rm -rf /dev/ubi0_$minor - mknod /dev/ubi0_$minor c $major $(($minor + 1)) - done - passed -} - -# delete_volume - Delete a volume. If it does not exist, do not try -# to delete it. -# @id: volume id -# -delete_volume () -{ - volume=$1 - - ### FIXME broken sysfs!!!! - if [ -e /sys/class/ubi/$volume -o -e /sys/class/ubi/ubi0/$volume -o -e /sys/class/ubi/ubi0_$volume ]; then - - echo -n "*** Truncate volume if it exists ... " - $UBIWRITEVOL -d0 -n$volume -t - if [ $? -ne "0" ] ; then - exit_failure - fi - passed - - echo -n "*** Delete volume if it exists ... " - $UBIRMVOL -d0 -n$volume - if [ $? -ne "0" ] ; then - exit_failure - fi - passed - fi -} - -echo "***********************************************************************" -echo "* UBI Tools Testing starts now ... *" -echo "* Good luck! *" -echo "***********************************************************************" - -# Set to zero if not running on example hardware -grep ubi /proc/devices > /dev/null -if [ $? -ne "0" ]; then - echo "No UBI found in /proc/devices! I am broken!" - exit_failure -fi - -# Set to zero if not running on example hardware -grep 1142 /proc/cpuinfo > /dev/null -if [ $? -eq "0" ]; then - echo "Running on example hardware" - mount -o remount,rw / / - sleep 1 - fix_sysfs_issue -else - echo "Running on other hardware" -fi - -### Test basic stuff -pfiflash_basic () -{ - echo "Calling pfiflash with test-data ... " - echo " $PFIFLASH $test_pfi" - $PFIFLASH $test_pfi - if [ $? -ne "0" ]; then - echo "Uhhh something went wrong!" - exit_failure - fi - passed - - echo "Testing if data is correct 10 and 11 ... " - $CMP /dev/ubi0_10 /dev/ubi0_11 - if [ $? -ne "0" ]; then - echo "Mirrored volumes not equal!" - exit_failure - fi - passed - - echo "Comparing against original data ... " - $CMP /dev/ubi0_10 test_u-boot.bin - if [ $? -ne "0" ]; then - echo "Compared volume not equal!" - exit_failure - fi - passed - - echo "Testing if data is correct 12 and 13 ... " - $CMP /dev/ubi0_12 /dev/ubi0_13 - if [ $? -ne "0" ]; then - echo "Mirrored volumes not equal!" - exit_failure - fi - passed - - echo "Comparing against original data ... " - $CMP /dev/ubi0_12 test_vmlinux.bin - if [ $? -ne "0" ]; then - echo "Compared volume not equal!" - exit_failure - fi - passed - - echo "Testing if data is correct 14 and 15 ... " - $CMP /dev/ubi0_14 /dev/ubi0_15 - if [ $? -ne "0" ]; then - echo "Mirrored volumes not equal!" - exit_failure - fi - passed -} - -### Test each and everything -pfiflash_advanced () -{ - if [ -e example_complete.pfi ]; then - echo "Calling pfiflash with real data ... " - $PFIFLASH -p overwrite --complete example_complete.pfi - if [ $? -ne "0" ]; then - echo "Uhhh something went wrong!" - exit_failure - fi - passed - - echo "Testing if data is correct 2 and 3 ... " - $CMP /dev/ubi0_2 /dev/ubi0_3 - if [ $? -ne "0" ]; then - echo "Mirrored volumes not equal!" - exit_failure - fi - passed - - echo "Comparing against original data ... " - $CMP /dev/ubi0_2 u-boot.bin - if [ $? -ne "0" ]; then - echo "Compared volume not equal!" - exit_failure - fi - passed - - echo "Testing if data is correct 6 and 7 ... " - $CMP /dev/ubi0_6 /dev/ubi0_7 - if [ $? -ne "0" ]; then - echo "Mirrored volumes not equal!" - exit_failure - fi - passed - - echo "Comparing against original data ... " - $CMP /dev/ubi0_6 vmlinux.bin - if [ $? -ne "0" ]; then - echo "Compared volume not equal!" - exit_failure - fi - passed - fi -} - -echo "***********************************************************************" -echo "* Testing pfiflash ... *" -echo "***********************************************************************" -echo "VERSION: $VERSION" - -pfiflash_basic -pfiflash_advanced - -echo "***********************************************************************" -echo "* Congratulations, no errors found! *" -echo "* Have fun with your cool UBI system! *" -echo "***********************************************************************" - -exit_success diff --git a/ubi-utils/scripts/ubicrc32.pl b/ubi-utils/scripts/ubicrc32.pl deleted file mode 100644 index 92711cb..0000000 --- a/ubi-utils/scripts/ubicrc32.pl +++ /dev/null @@ -1,74 +0,0 @@ -#!/usr/bin/perl -w - -# Subroutine crc32(): Calculates the CRC on a given string. - -{ - my @table = (); - - # @brief Calculate CRC32 for a given string. - sub crc32 - { - unless (@table) { - # Initialize the CRC table - my $poly = 0xEDB88320; - @table = (); - - for my $i (0..255) { - my $c = $i; - - for my $j (0..7) { - $c = ($c & 1) ? (($c >> 1) ^ $poly) : ($c >> 1); - } - $table[$i] = $c; - } - } - my $s = shift; # string to calculate the CRC for - my $crc = shift; # CRC start value - - defined($crc) - or $crc = 0xffffffff; # Default CRC start value - - for (my $i = 0; $i < length($s); $i++) { - $crc = $table[($crc ^ ord(substr($s, $i, 1))) & 0xff] - ^ ($crc >> 8); - } - return $crc; - } -} - -sub crc32_on_file -{ - my $file = shift; - - my $crc32 = crc32(''); - my $buf = ''; - my $ret = 0; - - while ($ret = read($file, $buf, 8192)) { - $crc32 = crc32($buf, $crc32); - } - defined($ret) - or return undef; - printf("0x%x\n", $crc32); -} - - -# Main routine: Calculate the CRCs on the given files and print the -# results. - -{ - if (@ARGV) { - while (my $path = shift) { - my $file; - open $file, "<", $path - or die "Error opening '$path'.\n"; - - &crc32_on_file($file) - or die "Error reading from '$path'.\n"; - close $file; - } - } else { - &crc32_on_file(\*STDIN) - or die "Error reading from stdin.\n"; - } -} diff --git a/ubi-utils/scripts/unubi_test.sh b/ubi-utils/scripts/unubi_test.sh deleted file mode 100644 index 40dc2e2..0000000 --- a/ubi-utils/scripts/unubi_test.sh +++ /dev/null @@ -1,105 +0,0 @@ -#!/bin/sh -# -# Use raw NAND data, extract UBI image and apply tool to it. -# Test basic functionality. -# -# 2007 Frank Haverkamp <haver@vnet.ibm.com> -# - -version=1.1 - -image=data.mif -oob=oob.bin -data=data.bin -pagesize=2048 -volmax=31 -datadir=unubi_data - -# general arguments e.g. debug enablement -# unubi_args="-D" - -echo "------------------------------------------------------------------------" -echo "Testcase: ${0} Version: ${version}" -echo "------------------------------------------------------------------------" -echo "Testing nand2bin ..." -echo " Input: ${image}" -echo " Data: ${data}" -echo " OOB: ${oob}" -echo " Pagesize: ${pagesize}" -nand2bin --pagesize ${pagesize} -o ${data} -O ${oob} ${image} -echo - -echo "------------------------------------------------------------------------" -echo "Testing unubi ..." -echo "------------------------------------------------------------------------" -unubi --version -echo - -echo "------------------------------------------------------------------------" -echo "Trying to extract first ${volmax} volumes ..." -echo "------------------------------------------------------------------------" -mkdir -p ${datadir}/volumes -for v in `seq 0 ${volmax}` ; do - unubi ${unubi_args} -r${v} -d${datadir}/volumes ${data} - echo -n "." -done -echo "ok" -ls -l ${datadir}/volumes -echo - -echo "------------------------------------------------------------------------" -echo "Extracting graphics ..." -echo "------------------------------------------------------------------------" -unubi -a -d${datadir} ${data} -echo "Use gnuplot to display:" -ls ${datadir}/*.plot -ls ${datadir}/*.data -echo - -echo "------------------------------------------------------------------------" -echo "eb-split" -echo "------------------------------------------------------------------------" -unubi -e -d${datadir}/eb-split ${data} -ls -l ${datadir}/eb-split -echo - -echo "------------------------------------------------------------------------" -echo "vol-split" -echo "------------------------------------------------------------------------" -unubi -v -d${datadir}/vol-split ${data} -ls -l ${datadir}/vol-split -echo -echo "The generated images contain only the data (126KiB in our " -echo "case) not including the UBI erase count and volume info " -echo "header. For dynamic volumes the data should be the full " -echo "126KiB. Unubi cannot know how much of the data is valid. " -echo - -echo "------------------------------------------------------------------------" -echo "!vol-split" -echo "------------------------------------------------------------------------" -unubi -V -d${datadir}/vol-split! ${data} -ls -l ${datadir}/vol-split\! -echo -echo "The generated images contain the full block data of 128KiB " -echo "including the UBI erase count and volume information header." -echo - -echo "------------------------------------------------------------------------" -echo "Extracting volume info table ..." -echo "------------------------------------------------------------------------" -unubi -i -d${datadir} ${data} -echo "I strongly hope that empty ubi blocks are filled with 0xff! " -echo - -echo "------------------------------------------------------------------------" -echo "Table 0" -echo "------------------------------------------------------------------------" -cat ${datadir}/vol_info_table0 -echo - -echo "------------------------------------------------------------------------" -echo "Table 1" -echo "------------------------------------------------------------------------" -cat ${datadir}/vol_info_table1 -echo |