diff options
Diffstat (limited to 'mkfs.ubifs/ubifs-media.h')
| -rw-r--r-- | mkfs.ubifs/ubifs-media.h | 747 |
1 files changed, 0 insertions, 747 deletions
diff --git a/mkfs.ubifs/ubifs-media.h b/mkfs.ubifs/ubifs-media.h deleted file mode 100644 index fe62d0e..0000000 --- a/mkfs.ubifs/ubifs-media.h +++ /dev/null @@ -1,747 +0,0 @@ -/* - * This file is part of UBIFS. - * - * Copyright (C) 2006-2008 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 51 - * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Authors: Artem Bityutskiy (Битюцкий Артём) - * Adrian Hunter - */ - -/* - * This file describes UBIFS on-flash format and contains definitions of all the - * relevant data structures and constants. - * - * All UBIFS on-flash objects are stored in the form of nodes. All nodes start - * with the UBIFS node magic number and have the same common header. Nodes - * always sit at 8-byte aligned positions on the media and node header sizes are - * also 8-byte aligned (except for the indexing node and the padding node). - */ - -#ifndef __UBIFS_MEDIA_H__ -#define __UBIFS_MEDIA_H__ - -/* UBIFS node magic number (must not have the padding byte first or last) */ -#define UBIFS_NODE_MAGIC 0x06101831 - -/* UBIFS on-flash format version */ -#define UBIFS_FORMAT_VERSION 4 - -/* Minimum logical eraseblock size in bytes */ -#define UBIFS_MIN_LEB_SZ (15*1024) - -/* Initial CRC32 value used when calculating CRC checksums */ -#define UBIFS_CRC32_INIT 0xFFFFFFFFU - -/* - * UBIFS does not try to compress data if its length is less than the below - * constant. - */ -#define UBIFS_MIN_COMPR_LEN 128 - -/* Root inode number */ -#define UBIFS_ROOT_INO 1 - -/* Lowest inode number used for regular inodes (not UBIFS-only internal ones) */ -#define UBIFS_FIRST_INO 64 - -/* - * Maximum file name and extended attribute length (must be a multiple of 8, - * minus 1). - */ -#define UBIFS_MAX_NLEN 255 - -/* Maximum number of data journal heads */ -#define UBIFS_MAX_JHEADS 1 - -/* - * Size of UBIFS data block. Note, UBIFS is not a block oriented file-system, - * which means that it does not treat the underlying media as consisting of - * blocks like in case of hard drives. Do not be confused. UBIFS block is just - * the maximum amount of data which one data node can have or which can be - * attached to an inode node. - */ -#define UBIFS_BLOCK_SIZE 4096 -#define UBIFS_BLOCK_SHIFT 12 -#define UBIFS_BLOCK_MASK 0x00000FFF - -/* UBIFS padding byte pattern (must not be first or last byte of node magic) */ -#define UBIFS_PADDING_BYTE 0xCE - -/* Maximum possible key length */ -#define UBIFS_MAX_KEY_LEN 16 - -/* Key length ("simple" format) */ -#define UBIFS_SK_LEN 8 - -/* Minimum index tree fanout */ -#define UBIFS_MIN_FANOUT 3 - -/* Maximum number of levels in UBIFS indexing B-tree */ -#define UBIFS_MAX_LEVELS 512 - -/* Maximum amount of data attached to an inode in bytes */ -#define UBIFS_MAX_INO_DATA UBIFS_BLOCK_SIZE - -/* LEB Properties Tree fanout (must be power of 2) and fanout shift */ -#define UBIFS_LPT_FANOUT 4 -#define UBIFS_LPT_FANOUT_SHIFT 2 - -/* LEB Properties Tree bit field sizes */ -#define UBIFS_LPT_CRC_BITS 16 -#define UBIFS_LPT_CRC_BYTES 2 -#define UBIFS_LPT_TYPE_BITS 4 - -/* The key is always at the same position in all keyed nodes */ -#define UBIFS_KEY_OFFSET offsetof(struct ubifs_ino_node, key) - -/* - * LEB Properties Tree node types. - * - * UBIFS_LPT_PNODE: LPT leaf node (contains LEB properties) - * UBIFS_LPT_NNODE: LPT internal node - * UBIFS_LPT_LTAB: LPT's own lprops table - * UBIFS_LPT_LSAVE: LPT's save table (big model only) - * UBIFS_LPT_NODE_CNT: count of LPT node types - * UBIFS_LPT_NOT_A_NODE: all ones (15 for 4 bits) is never a valid node type - */ -enum { - UBIFS_LPT_PNODE, - UBIFS_LPT_NNODE, - UBIFS_LPT_LTAB, - UBIFS_LPT_LSAVE, - UBIFS_LPT_NODE_CNT, - UBIFS_LPT_NOT_A_NODE = (1 << UBIFS_LPT_TYPE_BITS) - 1, -}; - -/* - * UBIFS inode types. - * - * UBIFS_ITYPE_REG: regular file - * UBIFS_ITYPE_DIR: directory - * UBIFS_ITYPE_LNK: soft link - * UBIFS_ITYPE_BLK: block device node - * UBIFS_ITYPE_CHR: character device node - * UBIFS_ITYPE_FIFO: fifo - * UBIFS_ITYPE_SOCK: socket - * UBIFS_ITYPES_CNT: count of supported file types - */ -enum { - UBIFS_ITYPE_REG, - UBIFS_ITYPE_DIR, - UBIFS_ITYPE_LNK, - UBIFS_ITYPE_BLK, - UBIFS_ITYPE_CHR, - UBIFS_ITYPE_FIFO, - UBIFS_ITYPE_SOCK, - UBIFS_ITYPES_CNT, -}; - -/* - * Supported key hash functions. - * - * UBIFS_KEY_HASH_R5: R5 hash - * UBIFS_KEY_HASH_TEST: test hash which just returns first 4 bytes of the name - */ -enum { - UBIFS_KEY_HASH_R5, - UBIFS_KEY_HASH_TEST, -}; - -/* - * Supported key formats. - * - * UBIFS_SIMPLE_KEY_FMT: simple key format - */ -enum { - UBIFS_SIMPLE_KEY_FMT, -}; - -/* - * The simple key format uses 29 bits for storing UBIFS block number and hash - * value. - */ -#define UBIFS_S_KEY_BLOCK_BITS 29 -#define UBIFS_S_KEY_BLOCK_MASK 0x1FFFFFFF -#define UBIFS_S_KEY_HASH_BITS UBIFS_S_KEY_BLOCK_BITS -#define UBIFS_S_KEY_HASH_MASK UBIFS_S_KEY_BLOCK_MASK - -/* - * Key types. - * - * UBIFS_INO_KEY: inode node key - * UBIFS_DATA_KEY: data node key - * UBIFS_DENT_KEY: directory entry node key - * UBIFS_XENT_KEY: extended attribute entry key - * UBIFS_KEY_TYPES_CNT: number of supported key types - */ -enum { - UBIFS_INO_KEY, - UBIFS_DATA_KEY, - UBIFS_DENT_KEY, - UBIFS_XENT_KEY, - UBIFS_KEY_TYPES_CNT, -}; - -/* Count of LEBs reserved for the superblock area */ -#define UBIFS_SB_LEBS 1 -/* Count of LEBs reserved for the master area */ -#define UBIFS_MST_LEBS 2 - -/* First LEB of the superblock area */ -#define UBIFS_SB_LNUM 0 -/* First LEB of the master area */ -#define UBIFS_MST_LNUM (UBIFS_SB_LNUM + UBIFS_SB_LEBS) -/* First LEB of the log area */ -#define UBIFS_LOG_LNUM (UBIFS_MST_LNUM + UBIFS_MST_LEBS) - -/* - * The below constants define the absolute minimum values for various UBIFS - * media areas. Many of them actually depend of flash geometry and the FS - * configuration (number of journal heads, orphan LEBs, etc). This means that - * the smallest volume size which can be used for UBIFS cannot be pre-defined - * by these constants. The file-system that meets the below limitation will not - * necessarily mount. UBIFS does run-time calculations and validates the FS - * size. - */ - -/* Minimum number of logical eraseblocks in the log */ -#define UBIFS_MIN_LOG_LEBS 2 -/* Minimum number of bud logical eraseblocks (one for each head) */ -#define UBIFS_MIN_BUD_LEBS 3 -/* Minimum number of journal logical eraseblocks */ -#define UBIFS_MIN_JNL_LEBS (UBIFS_MIN_LOG_LEBS + UBIFS_MIN_BUD_LEBS) -/* Minimum number of LPT area logical eraseblocks */ -#define UBIFS_MIN_LPT_LEBS 2 -/* Minimum number of orphan area logical eraseblocks */ -#define UBIFS_MIN_ORPH_LEBS 1 -/* - * Minimum number of main area logical eraseblocks (buds, 3 for the index, 1 - * for GC, 1 for deletions, and at least 1 for committed data). - */ -#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 6) - -/* Minimum number of logical eraseblocks */ -#define UBIFS_MIN_LEB_CNT (UBIFS_SB_LEBS + UBIFS_MST_LEBS + \ - UBIFS_MIN_LOG_LEBS + UBIFS_MIN_LPT_LEBS + \ - UBIFS_MIN_ORPH_LEBS + UBIFS_MIN_MAIN_LEBS) - -/* Node sizes (N.B. these are guaranteed to be multiples of 8) */ -#define UBIFS_CH_SZ sizeof(struct ubifs_ch) -#define UBIFS_INO_NODE_SZ sizeof(struct ubifs_ino_node) -#define UBIFS_DATA_NODE_SZ sizeof(struct ubifs_data_node) -#define UBIFS_DENT_NODE_SZ sizeof(struct ubifs_dent_node) -#define UBIFS_TRUN_NODE_SZ sizeof(struct ubifs_trun_node) -#define UBIFS_PAD_NODE_SZ sizeof(struct ubifs_pad_node) -#define UBIFS_SB_NODE_SZ sizeof(struct ubifs_sb_node) -#define UBIFS_MST_NODE_SZ sizeof(struct ubifs_mst_node) -#define UBIFS_REF_NODE_SZ sizeof(struct ubifs_ref_node) -#define UBIFS_IDX_NODE_SZ sizeof(struct ubifs_idx_node) -#define UBIFS_CS_NODE_SZ sizeof(struct ubifs_cs_node) -#define UBIFS_ORPH_NODE_SZ sizeof(struct ubifs_orph_node) -/* Extended attribute entry nodes are identical to directory entry nodes */ -#define UBIFS_XENT_NODE_SZ UBIFS_DENT_NODE_SZ -/* Only this does not have to be multiple of 8 bytes */ -#define UBIFS_BRANCH_SZ sizeof(struct ubifs_branch) - -/* Maximum node sizes (N.B. these are guaranteed to be multiples of 8) */ -#define UBIFS_MAX_DATA_NODE_SZ (UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE) -#define UBIFS_MAX_INO_NODE_SZ (UBIFS_INO_NODE_SZ + UBIFS_MAX_INO_DATA) -#define UBIFS_MAX_DENT_NODE_SZ (UBIFS_DENT_NODE_SZ + UBIFS_MAX_NLEN + 1) -#define UBIFS_MAX_XENT_NODE_SZ UBIFS_MAX_DENT_NODE_SZ - -/* The largest UBIFS node */ -#define UBIFS_MAX_NODE_SZ UBIFS_MAX_INO_NODE_SZ - -/* - * On-flash inode flags. - * - * UBIFS_COMPR_FL: use compression for this inode - * UBIFS_SYNC_FL: I/O on this inode has to be synchronous - * UBIFS_IMMUTABLE_FL: inode is immutable - * UBIFS_APPEND_FL: writes to the inode may only append data - * UBIFS_DIRSYNC_FL: I/O on this directory inode has to be synchronous - * UBIFS_XATTR_FL: this inode is the inode for an extended attribute value - * - * Note, these are on-flash flags which correspond to ioctl flags - * (@FS_COMPR_FL, etc). They have the same values now, but generally, do not - * have to be the same. - */ -enum { - UBIFS_COMPR_FL = 0x01, - UBIFS_SYNC_FL = 0x02, - UBIFS_IMMUTABLE_FL = 0x04, - UBIFS_APPEND_FL = 0x08, - UBIFS_DIRSYNC_FL = 0x10, - UBIFS_XATTR_FL = 0x20, -}; - -/* Inode flag bits used by UBIFS */ -#define UBIFS_FL_MASK 0x0000001F - -/* - * UBIFS compression algorithms. - * - * UBIFS_COMPR_NONE: no compression - * UBIFS_COMPR_LZO: LZO compression - * UBIFS_COMPR_ZLIB: ZLIB compression - * UBIFS_COMPR_TYPES_CNT: count of supported compression types - */ -enum { - UBIFS_COMPR_NONE, - UBIFS_COMPR_LZO, - UBIFS_COMPR_ZLIB, - UBIFS_COMPR_TYPES_CNT, -}; - -/* - * UBIFS node types. - * - * UBIFS_INO_NODE: inode node - * UBIFS_DATA_NODE: data node - * UBIFS_DENT_NODE: directory entry node - * UBIFS_XENT_NODE: extended attribute node - * UBIFS_TRUN_NODE: truncation node - * UBIFS_PAD_NODE: padding node - * UBIFS_SB_NODE: superblock node - * UBIFS_MST_NODE: master node - * UBIFS_REF_NODE: LEB reference node - * UBIFS_IDX_NODE: index node - * UBIFS_CS_NODE: commit start node - * UBIFS_ORPH_NODE: orphan node - * UBIFS_NODE_TYPES_CNT: count of supported node types - * - * Note, we index arrays by these numbers, so keep them low and contiguous. - * Node type constants for inodes, direntries and so on have to be the same as - * corresponding key type constants. - */ -enum { - UBIFS_INO_NODE, - UBIFS_DATA_NODE, - UBIFS_DENT_NODE, - UBIFS_XENT_NODE, - UBIFS_TRUN_NODE, - UBIFS_PAD_NODE, - UBIFS_SB_NODE, - UBIFS_MST_NODE, - UBIFS_REF_NODE, - UBIFS_IDX_NODE, - UBIFS_CS_NODE, - UBIFS_ORPH_NODE, - UBIFS_NODE_TYPES_CNT, -}; - -/* - * Master node flags. - * - * UBIFS_MST_DIRTY: rebooted uncleanly - master node is dirty - * UBIFS_MST_NO_ORPHS: no orphan inodes present - * UBIFS_MST_RCVRY: written by recovery - */ -enum { - UBIFS_MST_DIRTY = 1, - UBIFS_MST_NO_ORPHS = 2, - UBIFS_MST_RCVRY = 4, -}; - -/* - * Node group type (used by recovery to recover whole group or none). - * - * UBIFS_NO_NODE_GROUP: this node is not part of a group - * UBIFS_IN_NODE_GROUP: this node is a part of a group - * UBIFS_LAST_OF_NODE_GROUP: this node is the last in a group - */ -enum { - UBIFS_NO_NODE_GROUP = 0, - UBIFS_IN_NODE_GROUP, - UBIFS_LAST_OF_NODE_GROUP, -}; - -/* - * Superblock flags. - * - * UBIFS_FLG_BIGLPT: if "big" LPT model is used if set - * UBIFS_FLG_SPACE_FIXUP: first-mount "fixup" of free space within LEBs needed - */ -enum { - UBIFS_FLG_BIGLPT = 0x02, - UBIFS_FLG_SPACE_FIXUP = 0x04, -}; - -/** - * struct ubifs_ch - common header node. - * @magic: UBIFS node magic number (%UBIFS_NODE_MAGIC) - * @crc: CRC-32 checksum of the node header - * @sqnum: sequence number - * @len: full node length - * @node_type: node type - * @group_type: node group type - * @padding: reserved for future, zeroes - * - * Every UBIFS node starts with this common part. If the node has a key, the - * key always goes next. - */ -struct ubifs_ch { - __le32 magic; - __le32 crc; - __le64 sqnum; - __le32 len; - __u8 node_type; - __u8 group_type; - __u8 padding[2]; -} __attribute__ ((packed)); - -/** - * union ubifs_dev_desc - device node descriptor. - * @new: new type device descriptor - * @huge: huge type device descriptor - * - * This data structure describes major/minor numbers of a device node. In an - * inode is a device node then its data contains an object of this type. UBIFS - * uses standard Linux "new" and "huge" device node encodings. - */ -union ubifs_dev_desc { - __le32 new; - __le64 huge; -} __attribute__ ((packed)); - -/** - * struct ubifs_ino_node - inode node. - * @ch: common header - * @key: node key - * @creat_sqnum: sequence number at time of creation - * @size: inode size in bytes (amount of uncompressed data) - * @atime_sec: access time seconds - * @ctime_sec: creation time seconds - * @mtime_sec: modification time seconds - * @atime_nsec: access time nanoseconds - * @ctime_nsec: creation time nanoseconds - * @mtime_nsec: modification time nanoseconds - * @nlink: number of hard links - * @uid: owner ID - * @gid: group ID - * @mode: access flags - * @flags: per-inode flags (%UBIFS_COMPR_FL, %UBIFS_SYNC_FL, etc) - * @data_len: inode data length - * @xattr_cnt: count of extended attributes this inode has - * @xattr_size: summarized size of all extended attributes in bytes - * @padding1: reserved for future, zeroes - * @xattr_names: sum of lengths of all extended attribute names belonging to - * this inode - * @compr_type: compression type used for this inode - * @padding2: reserved for future, zeroes - * @data: data attached to the inode - * - * Note, even though inode compression type is defined by @compr_type, some - * nodes of this inode may be compressed with different compressor - this - * happens if compression type is changed while the inode already has data - * nodes. But @compr_type will be use for further writes to the inode. - * - * Note, do not forget to amend 'zero_ino_node_unused()' function when changing - * the padding fields. - */ -struct ubifs_ino_node { - struct ubifs_ch ch; - __u8 key[UBIFS_MAX_KEY_LEN]; - __le64 creat_sqnum; - __le64 size; - __le64 atime_sec; - __le64 ctime_sec; - __le64 mtime_sec; - __le32 atime_nsec; - __le32 ctime_nsec; - __le32 mtime_nsec; - __le32 nlink; - __le32 uid; - __le32 gid; - __le32 mode; - __le32 flags; - __le32 data_len; - __le32 xattr_cnt; - __le32 xattr_size; - __u8 padding1[4]; /* Watch 'zero_ino_node_unused()' if changing! */ - __le32 xattr_names; - __le16 compr_type; - __u8 padding2[26]; /* Watch 'zero_ino_node_unused()' if changing! */ - __u8 data[]; -} __attribute__ ((packed)); - -/** - * struct ubifs_dent_node - directory entry node. - * @ch: common header - * @key: node key - * @inum: target inode number - * @padding1: reserved for future, zeroes - * @type: type of the target inode (%UBIFS_ITYPE_REG, %UBIFS_ITYPE_DIR, etc) - * @nlen: name length - * @padding2: reserved for future, zeroes - * @name: zero-terminated name - * - * Note, do not forget to amend 'zero_dent_node_unused()' function when - * changing the padding fields. - */ -struct ubifs_dent_node { - struct ubifs_ch ch; - __u8 key[UBIFS_MAX_KEY_LEN]; - __le64 inum; - __u8 padding1; - __u8 type; - __le16 nlen; - __u8 padding2[4]; /* Watch 'zero_dent_node_unused()' if changing! */ - __u8 name[]; -} __attribute__ ((packed)); - -/** - * struct ubifs_data_node - data node. - * @ch: common header - * @key: node key - * @size: uncompressed data size in bytes - * @compr_type: compression type (%UBIFS_COMPR_NONE, %UBIFS_COMPR_LZO, etc) - * @padding: reserved for future, zeroes - * @data: data - * - * Note, do not forget to amend 'zero_data_node_unused()' function when - * changing the padding fields. - */ -struct ubifs_data_node { - struct ubifs_ch ch; - __u8 key[UBIFS_MAX_KEY_LEN]; - __le32 size; - __le16 compr_type; - __u8 padding[2]; /* Watch 'zero_data_node_unused()' if changing! */ - __u8 data[]; -} __attribute__ ((packed)); - -/** - * struct ubifs_trun_node - truncation node. - * @ch: common header - * @inum: truncated inode number - * @padding: reserved for future, zeroes - * @old_size: size before truncation - * @new_size: size after truncation - * - * This node exists only in the journal and never goes to the main area. Note, - * do not forget to amend 'zero_trun_node_unused()' function when changing the - * padding fields. - */ -struct ubifs_trun_node { - struct ubifs_ch ch; - __le32 inum; - __u8 padding[12]; /* Watch 'zero_trun_node_unused()' if changing! */ - __le64 old_size; - __le64 new_size; -} __attribute__ ((packed)); - -/** - * struct ubifs_pad_node - padding node. - * @ch: common header - * @pad_len: how many bytes after this node are unused (because padded) - * @padding: reserved for future, zeroes - */ -struct ubifs_pad_node { - struct ubifs_ch ch; - __le32 pad_len; -} __attribute__ ((packed)); - -/** - * struct ubifs_sb_node - superblock node. - * @ch: common header - * @padding: reserved for future, zeroes - * @key_hash: type of hash function used in keys - * @key_fmt: format of the key - * @flags: file-system flags (%UBIFS_FLG_BIGLPT, etc) - * @min_io_size: minimal input/output unit size - * @leb_size: logical eraseblock size in bytes - * @leb_cnt: count of LEBs used by file-system - * @max_leb_cnt: maximum count of LEBs used by file-system - * @max_bud_bytes: maximum amount of data stored in buds - * @log_lebs: log size in logical eraseblocks - * @lpt_lebs: number of LEBs used for lprops table - * @orph_lebs: number of LEBs used for recording orphans - * @jhead_cnt: count of journal heads - * @fanout: tree fanout (max. number of links per indexing node) - * @lsave_cnt: number of LEB numbers in LPT's save table - * @fmt_version: UBIFS on-flash format version - * @default_compr: default compression algorithm (%UBIFS_COMPR_LZO, etc) - * @padding1: reserved for future, zeroes - * @rp_uid: reserve pool UID - * @rp_gid: reserve pool GID - * @rp_size: size of the reserved pool in bytes - * @padding2: reserved for future, zeroes - * @time_gran: time granularity in nanoseconds - * @uuid: UUID generated when the file system image was created - */ -struct ubifs_sb_node { - struct ubifs_ch ch; - __u8 padding[2]; - __u8 key_hash; - __u8 key_fmt; - __le32 flags; - __le32 min_io_size; - __le32 leb_size; - __le32 leb_cnt; - __le32 max_leb_cnt; - __le64 max_bud_bytes; - __le32 log_lebs; - __le32 lpt_lebs; - __le32 orph_lebs; - __le32 jhead_cnt; - __le32 fanout; - __le32 lsave_cnt; - __le32 fmt_version; - __le16 default_compr; - __u8 padding1[2]; - __le32 rp_uid; - __le32 rp_gid; - __le64 rp_size; - __le32 time_gran; - __u8 uuid[16]; - __u8 padding2[3972]; -} __attribute__ ((packed)); - -/** - * struct ubifs_mst_node - master node. - * @ch: common header - * @highest_inum: highest inode number in the committed index - * @cmt_no: commit number - * @flags: various flags (%UBIFS_MST_DIRTY, etc) - * @log_lnum: start of the log - * @root_lnum: LEB number of the root indexing node - * @root_offs: offset within @root_lnum - * @root_len: root indexing node length - * @gc_lnum: LEB reserved for garbage collection (%-1 value means the LEB was - * not reserved and should be reserved on mount) - * @ihead_lnum: LEB number of index head - * @ihead_offs: offset of index head - * @index_size: size of index on flash - * @total_free: total free space in bytes - * @total_dirty: total dirty space in bytes - * @total_used: total used space in bytes (includes only data LEBs) - * @total_dead: total dead space in bytes (includes only data LEBs) - * @total_dark: total dark space in bytes (includes only data LEBs) - * @lpt_lnum: LEB number of LPT root nnode - * @lpt_offs: offset of LPT root nnode - * @nhead_lnum: LEB number of LPT head - * @nhead_offs: offset of LPT head - * @ltab_lnum: LEB number of LPT's own lprops table - * @ltab_offs: offset of LPT's own lprops table - * @lsave_lnum: LEB number of LPT's save table (big model only) - * @lsave_offs: offset of LPT's save table (big model only) - * @lscan_lnum: LEB number of last LPT scan - * @empty_lebs: number of empty logical eraseblocks - * @idx_lebs: number of indexing logical eraseblocks - * @leb_cnt: count of LEBs used by file-system - * @padding: reserved for future, zeroes - */ -struct ubifs_mst_node { - struct ubifs_ch ch; - __le64 highest_inum; - __le64 cmt_no; - __le32 flags; - __le32 log_lnum; - __le32 root_lnum; - __le32 root_offs; - __le32 root_len; - __le32 gc_lnum; - __le32 ihead_lnum; - __le32 ihead_offs; - __le64 index_size; - __le64 total_free; - __le64 total_dirty; - __le64 total_used; - __le64 total_dead; - __le64 total_dark; - __le32 lpt_lnum; - __le32 lpt_offs; - __le32 nhead_lnum; - __le32 nhead_offs; - __le32 ltab_lnum; - __le32 ltab_offs; - __le32 lsave_lnum; - __le32 lsave_offs; - __le32 lscan_lnum; - __le32 empty_lebs; - __le32 idx_lebs; - __le32 leb_cnt; - __u8 padding[344]; -} __attribute__ ((packed)); - -/** - * struct ubifs_ref_node - logical eraseblock reference node. - * @ch: common header - * @lnum: the referred logical eraseblock number - * @offs: start offset in the referred LEB - * @jhead: journal head number - * @padding: reserved for future, zeroes - */ -struct ubifs_ref_node { - struct ubifs_ch ch; - __le32 lnum; - __le32 offs; - __le32 jhead; - __u8 padding[28]; -} __attribute__ ((packed)); - -/** - * struct ubifs_branch - key/reference/length branch - * @lnum: LEB number of the target node - * @offs: offset within @lnum - * @len: target node length - * @key: key - */ -struct ubifs_branch { - __le32 lnum; - __le32 offs; - __le32 len; - __u8 key[]; -} __attribute__ ((packed)); - -/** - * struct ubifs_idx_node - indexing node. - * @ch: common header - * @child_cnt: number of child index nodes - * @level: tree level - * @branches: LEB number / offset / length / key branches - */ -struct ubifs_idx_node { - struct ubifs_ch ch; - __le16 child_cnt; - __le16 level; - __u8 branches[]; -} __attribute__ ((packed)); - -/** - * struct ubifs_cs_node - commit start node. - * @ch: common header - * @cmt_no: commit number - */ -struct ubifs_cs_node { - struct ubifs_ch ch; - __le64 cmt_no; -} __attribute__ ((packed)); - -/** - * struct ubifs_orph_node - orphan node. - * @ch: common header - * @cmt_no: commit number (also top bit is set on the last node of the commit) - * @inos: inode numbers of orphans - */ -struct ubifs_orph_node { - struct ubifs_ch ch; - __le64 cmt_no; - __le64 inos[]; -} __attribute__ ((packed)); - -#endif /* __UBIFS_MEDIA_H__ */ |