UBI - Unsorted Block Images

UBI (Latin: "where?") manages multiple logical volumes on a single
flash device, specifically supporting NAND flash devices. UBI provides
a flexible partitioning concept which still allows for wear-levelling
across the whole flash device.

In a sense, UBI may be compared to the Logical Volume Manager
(LVM). Whereas LVM maps logical sector numbers to physical HDD sector
numbers, UBI maps logical eraseblocks to physical eraseblocks.

More information may be found in the UBI design documentation:
ubidesign.pdf. Which can be found here:
http://www.linux-mtd.infradead.org/doc/ubi.html

Partitioning/Re-partitioning

  An UBI volume occupies a certain number of erase blocks. This is
  limited by a configured maximum volume size, which could also be
  viewed as the partition size. Each individual UBI volume's size can
  be changed independently of the other UBI volumes, provided that the
  sum of all volume sizes doesn't exceed a certain limit.

  UBI supports dynamic volumes and static volumes. Static volumes are
  read-only and their contents are protected by CRC check sums.

Bad eraseblocks handling

  UBI transparently handles bad eraseblocks. When a physical
  eraseblock becomes bad, it is substituted by a good physical
  eraseblock, and the user does not even notice this.

Scrubbing

  On a NAND flash bit flips can occur on any write operation,
  sometimes also on read. If bit flips persist on the device, at first
  they can still be corrected by ECC, but once they accumulate,
  correction will become impossible. Thus it is best to actively scrub
  the affected eraseblock, by first copying it to a free eraseblock
  and then erasing the original. The UBI layer performs this type of
  scrubbing under the covers, transparently to the UBI volume users.

Erase Counts

  UBI maintains an erase count header per eraseblock. This frees
  higher-level layers (like file systems) from doing this and allows
  for centralized erase count management instead. The erase counts are
  used by the wear-levelling algorithm in the UBI layer. The algorithm
  itself is exchangeable.

Booting from NAND

  For booting directly from NAND flash the hardware must at least be
  capable of fetching and executing a small portion of the NAND
  flash. Some NAND flash controllers have this kind of support. They
  usually limit the window to a few kilobytes in erase block 0. This
  "initial program loader" (IPL) must then contain sufficient logic to
  load and execute the next boot phase.

  Due to bad eraseblocks, which may be randomly scattered over the
  flash device, it is problematic to store the "secondary program
  loader" (SPL) statically. Also, due to bit-flips it may become
  corrupted over time. UBI allows to solve this problem gracefully by
  storing the SPL in a small static UBI volume.

UBI volumes vs. static partitions

  UBI volumes are still very similar to static MTD partitions:

    * both consist of eraseblocks (logical eraseblocks in case of UBI
      volumes, and physical eraseblocks in case of static partitions;
    * both support three basic operations - read, write, erase.

  But UBI volumes have the following advantages over traditional
  static MTD partitions:

    * there are no eraseblock wear-leveling constraints in case of UBI
      volumes, so the user should not care about this;
    * there are no bit-flips and bad eraseblocks in case of UBI volumes.

  So, UBI volumes may be considered as flash devices with relaxed
  restrictions.

Where can it be found?

  Documentation, kernel code and applications can be found in the MTD
  gits.

What are the applications for?

  The applications help to create binary flash images for two
  purposes: pfi files (partial flash images) for in-system update of
  UBI volumes, and plain binary images, with or without OOB data in
  case of NAND, for a manufacturing step. Furthermore some tools
  are/and will be created that allow flash content analysis after a
  system has crashed.

Who did UBI?

  The original ideas, where UBI is based on, were developed by Andreas
  Arnez, Frank Haverkamp and Thomas Gleixner. Josh W. Boyer and
  some others were involved too. The implementation of the kernel
  layer was done by Artem B. Bityutskiy. The user-space applications
  and tools were written by Oliver Lohmann with contributions from
  Frank Haverkamp, Andreas Arnez, and Artem. Joern Engel contributed a
  patch which modifies JFFS2 so that it can be run on a UBI
  volume. Thomas Gleixner did modifications to the NAND layer and also
  some to JFFS2 to make it work.

Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>

3 files changed, 678 insertions, 0 deletions

diff --git a/ubi-utils/src/ubiinfo/ubiflash.h b/ubi-utils/src/ubiinfo/ubiflash.h
new file mode 100644
index 0000000..6883879
--- /dev/null
+++ b/ubi-utils/src/ubiinfo/ubiflash.h
@@ -0,0 +1,185 @@
+#ifndef _UBI_FLASH_H
+#define _UBI_FLASH_H
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * FLASH related data structures and constants for UBI.
+ * UBI scan analysis.
+ *
+ * IPL Initial Program Loader
+ * SPL Secondary Program Loader
+ */
+
+#include <stdint.h>
+#include <asm/byteorder.h>
+#include <mtd/ubi-header.h>
+
+#define UBI_BLOCK_IDENT_MAX  16
+
+/* Block status information constants */
+enum blockstat {
+	/* IO Error */
+	STAT_IO_FAILED	= 1,	/* 0xffffffff */
+	/* Block is bad */
+	STAT_BLOCK_BAD	= 2,	/* 0xfffffffe */
+	/* ECC unrecoverable error */
+	STAT_ECC_ERROR	= 3,	/* 0xfffffffd */
+	/* CRC checksum failed */
+	STAT_CRC_ERROR	= 4,	/* 0xfffffffc */
+	/* Magic number not available */
+	STAT_NO_MAGIC	= 5,	/* 0xfffffffb */
+	/* No image available */
+	STAT_NO_IMAGE	= 6,
+	/* Image is invalid */
+	STAT_INVALID_IMAGE	= 7,
+	/* Image is defect */
+	STAT_DEFECT_IMAGE	= 8,
+};
+
+/*
+ * Flash types
+ */
+enum flashtypes {
+	FLASH_TYPE_NAND = 1,
+	FLASH_TYPE_NOR,
+};
+
+/* Nand read buffer size: 2KiB + 64byte spare */
+#define NAND_READ_BUF_SIZE	(2048 + 64)
+
+/* Size of the CRC table */
+#define CRC32_TABLE_SIZE	256
+
+/* Image is not available marker for image offs */
+#define UBI_IMAGE_NOT_AVAILABLE	0xFFFFFFFF
+
+/* Increment this number, whenever you change the structure */
+#define UBI_SCAN_INFO_VERSION	2
+
+/* Time measurement as far as the code size allows us to do this */
+#define UBI_TIMESTAMPS		16
+
+/**
+ * struct ubi_scan_info - RAM table filled by IPL scan
+ *
+ * @version:		Version of the structure
+ * @bootstatus:		Boot status of the current boot
+ * @flashtype:		Flash type (NAND/NOR)
+ * @flashid:		ID of the flash chip
+ * @flashmfr:		Manufacturer ID of the flash chip
+ * @flashsize:		Size of the FLASH
+ * @blocksize:		Eraseblock size
+ * @blockshift:		Shift count to calc block number from offset
+ * @nrblocks:		Number of erase blocks on flash
+ * @pagesize:		Pagesize (NAND)
+ * @blockinfo:		Pointer to an array of block status information
+ *			filled by FLASH scan
+ * @images:		Pointer to FLASH block translation table sorted
+ *			by image type and load order
+ * @imageblocks:	Number of blocks found per image
+ * @imageoffs:		Offset per imagetype to the first
+ *			block in the translation table
+ * @imagedups		duplicate blocks (max. one per volume)
+ * @imagelen:		Length of the loaded image
+ * @crc32_table:	CRC32 table buffer
+ * @page_buf:		Page buffer for NAND FLASH
+ */
+struct ubi_scan_info {
+	int			version;
+	unsigned int		bootstatus;
+	unsigned int		flashtype;
+	unsigned int		flashid;
+	unsigned int		flashmfr;
+	unsigned int		flashsize;
+	unsigned int		blocksize;
+	unsigned int		blockshift;
+	unsigned int		nrblocks;
+	unsigned int		pagesize;
+
+	struct ubi_vid_hdr	*blockinfo;
+	struct ubi_vid_hdr	**images;
+	unsigned int		imageblocks[UBI_BLOCK_IDENT_MAX];
+	unsigned int		imageoffs[UBI_BLOCK_IDENT_MAX];
+	struct ubi_vid_hdr	*imagedups[UBI_BLOCK_IDENT_MAX];
+	unsigned int		imagelen;
+	uint32_t		crc32_table[CRC32_TABLE_SIZE];
+	uint8_t			page_buf[NAND_READ_BUF_SIZE];
+	unsigned int		times[UBI_TIMESTAMPS];
+};
+
+/* External function definition */
+extern int flash_read(void *buf, unsigned int offs, int len);
+extern int flash_read_slice(struct ubi_scan_info *fi, void *buf,
+			    unsigned int offs, int len);
+extern void ipl_main(struct ubi_scan_info *fi);
+
+#ifndef CFG_EXAMPLE_IPL
+extern int ipl_scan(struct ubi_scan_info *fi);
+extern int ipl_load(struct ubi_scan_info *fi, int nr, uint8_t *loadaddr);
+
+#define IPL_STATIC
+
+#else
+#define IPL_STATIC static
+#endif
+
+/**
+ * get_boot_status - get the boot status register
+ *
+ * Shift the lower 16 bit into the upper 16 bit and return
+ * the result.
+ */
+uint32_t get_boot_status(void);
+
+/**
+ * set_boot_status - Set the boot status register
+ *
+ * @status:	The status value to set
+ *
+ */
+void set_boot_status(uint32_t status);
+
+static inline unsigned int ubi_vid_offset(struct ubi_scan_info *fi)
+{
+	if (fi->flashtype == FLASH_TYPE_NOR)
+		return UBI_EC_HDR_SIZE;
+	else
+		return fi->pagesize - UBI_VID_HDR_SIZE;
+}
+
+static inline unsigned int ubi_data_offset(struct ubi_scan_info *fi)
+{
+	if (fi->flashtype == FLASH_TYPE_NOR)
+		return UBI_EC_HDR_SIZE + UBI_VID_HDR_SIZE;
+	else
+		return fi->pagesize;
+}
+
+/**
+ * IPL checkpoints
+ */
+#define CHKP_HWINIT		0x3030
+#define CHKP_IPLSCAN_FAILED	0x3034
+#define CHKP_SPL_START		0x3037
+#define CHKP_SPLLOAD_STATUS	0x3130
+
+extern void checkpoint(uint32_t cpoint);
+extern void switch_watchdog(void);
+
+#endif
diff --git a/ubi-utils/src/ubiinfo/ubiinfo.c b/ubi-utils/src/ubiinfo/ubiinfo.c
new file mode 100644
index 0000000..6f7443b
--- /dev/null
+++ b/ubi-utils/src/ubiinfo/ubiinfo.c
@@ -0,0 +1,406 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Print out information about the UBI table this IPL is using.  This
+ * can be used afterwards to analyze misbehavior of the IPL code.  The
+ * input this program requires is the last 1 MiB DDRAM of our system
+ * where the scanning table is placed into.
+ *
+ * Author: Frank Haverkamp <haver@vnet.ibm.com>
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <string.h>
+#include <time.h>
+#include <argp.h>
+#include <getopt.h>
+#include <stdint.h>
+#include <sys/time.h>
+#include <netinet/in.h>
+
+#define __unused __attribute__((unused))
+
+/* This should hopefully be constant and the same in all
+ * configurations.
+ */
+#define CFG_IPLSIZE	512
+#define CFG_SPLCODE	512
+#define MEMTOP		0x06600000 /* Sunray 102 MiB */
+#define MEMSIZE		0x00100000 /* 1 MiB */
+#define CODE_SIZE	(64 * 1024)
+
+/* FIXME Except of the memory size this should be defined via
+ * parameters
+ *
+ * CFG_MEMTOP_BAMBOO  0x02000000
+ * CFG_MEMTOP_SUNRAY  0x06600000
+ */
+
+#include "ubiipl.h"
+#include "ubiflash.h"
+
+#define MIN(x,y) ((x)<(y)?(x):(y))
+
+#define ERR_RET(rc) {						   \
+		fprintf(stderr, "%s:%d failed rc=%d\n", __func__,	\
+			__LINE__, (rc));				\
+		return (rc);					    \
+	}
+
+#define VERSION "1.3"
+
+static error_t parse_opt (int key, char *arg, struct argp_state *state);
+const char *argp_program_version = VERSION;
+const char *argp_program_bug_address = "<haver@vnet.ibm.com>";
+
+static char doc[] = "\nVersion: " VERSION "\n\t"
+	" at "__DATE__" "__TIME__"\n"
+	"\n"
+	"Test program\n";
+
+static struct argp_option options[] = {
+	/* common settings */
+	{ .name = "verbose",
+	  .key = 'v',
+	  .arg = "<level>",
+	  .flags = 0,
+	  .doc = "Set verbosity level to <level>",
+	  .group = OPTION_ARG_OPTIONAL },
+
+	{ .name = "memtop",
+	  .key = 'm',
+	  .arg = "<memtop>",
+	  .flags = 0,
+	  .doc = "Set top of memory, 102 MiB for Sunray and 16 MiB for Bamboo",
+	  .group = OPTION_ARG_OPTIONAL },
+
+	{ .name = NULL,
+	  .key = 0,
+	  .arg = NULL,
+	  .flags = 0,
+	  .doc = NULL,
+	  .group = 0 },
+};
+
+typedef struct test_args {
+	int verbose;
+	unsigned long memtop;
+	char *arg1;
+	char **options;
+} test_args;
+
+static struct test_args g_args = {
+	.memtop = MEMTOP,
+	.verbose = 0,
+	.arg1 = NULL,
+	.options = NULL,
+};
+
+static struct argp argp = {
+	options:     options,
+	parser:	     parse_opt,
+	args_doc:    "[last_1MiB_memory.bin]",
+	doc:	 doc,
+	children:    NULL,
+	help_filter: NULL,
+	argp_domain: NULL,
+};
+
+static int verbose = 0;
+
+/**
+ * @brief Parse the arguments passed into the test case.
+ *
+ * @param key	    The parameter.
+ * @param arg	    Argument passed to parameter.
+ * @param state	  Location to put information on parameters.
+ *
+ * @return error_t
+ */
+static error_t
+parse_opt(int key, char *arg, struct argp_state *state)
+{
+	/* Get the `input' argument from `argp_parse', which we
+	   know is a pointer to our arguments structure. */
+	test_args *args = state->input;
+
+	switch (key) {
+		/* common settings */
+	case 'v': /* --verbose=<level> */
+		verbose = args->verbose = strtoul(arg, (char **)NULL, 0);
+		break;
+
+	case 'm': /* --memtop */
+		args->memtop = strtoul(arg, (char **)NULL, 0);
+		break;
+
+	case ARGP_KEY_NO_ARGS:
+		/* argp_usage(state); */
+		break;
+
+	case ARGP_KEY_ARG:
+		args->arg1 = arg;
+		/* Now we consume all the rest of the arguments.
+		   `state->next' is the index in `state->argv' of the
+		   next argument to be parsed, which is the first STRING
+		   we're interested in, so we can just use
+		   `&state->argv[state->next]' as the value for
+		   arguments->strings.
+
+		   _In addition_, by setting `state->next' to the end
+		   of the arguments, we can force argp to stop parsing
+		   here and return. */
+
+		args->options = &state->argv[state->next];
+		state->next = state->argc;
+		break;
+
+	case ARGP_KEY_END:
+		/* print out message if no arguments are given but PFI
+		   write should be done */
+		break;
+
+	default:
+		return(ARGP_ERR_UNKNOWN);
+	}
+	return 0;
+}
+
+static void
+hexdump(const char *buf, int len)
+{
+	char line[16];
+	char str[256];
+	char dummy[256];
+	int j = 0;
+
+	while (len > 0) {
+		int i;
+
+		strcpy(str, " ");
+
+		for (j = 0; j < MIN(16, len); j++)
+			line[j] = *buf++;
+
+		for (i = 0; i < j; i++) {
+			if (!(i & 3)) {
+				sprintf(dummy, " %.2x", line[i] & 0xff);
+				strcat(str, dummy);
+			} else {
+				sprintf(dummy, "%.2x", line[i] & 0xff);
+				strcat(str, dummy);
+			}
+		}
+
+		/* Print empty space */
+		for (; i < 16; i++)
+			if (!(i & 1))
+				strcat(str, "	");
+			else
+				strcat(str, "  ");
+
+		strcat(str, "  ");
+		for (i = 0; i < j; i++) {
+			if (isprint(line[i])) {
+				sprintf(dummy, "%c", line[i]);
+				strcat(str, dummy);
+			} else {
+				strcat(str, ".");
+			}
+		}
+		printf("%s\n", str);
+		len -= 16;
+	}
+}
+
+static void
+print_status_help(void)
+{
+	printf("Error Codes from IPL\n");
+	printf("   IO Error	     %d\n", STAT_IO_FAILED);
+	printf("   Block is bad	     %d\n", STAT_BLOCK_BAD);
+	printf("   ECC unrec error   %d\n", STAT_ECC_ERROR);
+	printf("   CRC csum failed   %d\n", STAT_CRC_ERROR);
+	printf("   Magic not avail   %d\n", STAT_NO_MAGIC);
+	printf("   No image avail    %d\n", STAT_NO_IMAGE);
+	printf("   Image is invalid  %d\n", STAT_INVALID_IMAGE);
+	printf("   Image is defect   %d\n\n", STAT_DEFECT_IMAGE);
+
+}
+
+static void
+print_ubi_scan_info(struct ubi_scan_info *fi)
+{
+	int i;
+
+	printf("ubi_scan_info\n");
+	printf("    version	 %08x\n", ntohl(fi->version));
+	printf("    bootstatus	 %08x\n", ntohl(fi->bootstatus));
+	printf("    flashtype	 %08x\n", ntohl(fi->flashtype));
+	printf("    flashid	 %08x\n", ntohl(fi->flashid));
+	printf("    flashmfgr	 %08x\n", ntohl(fi->flashmfr));
+	printf("    flashsize	 %d bytes (%dM)\n",
+	       ntohl(fi->flashsize), ntohl(fi->flashsize) / (1024 * 1024));
+	printf("    blocksize	 %d bytes\n", ntohl(fi->blocksize));
+	printf("    blockshift	 %d\n", ntohl(fi->blockshift));
+	printf("    nrblocks	 %d\n", ntohl(fi->nrblocks));
+	printf("    pagesize	 %d\n", ntohl(fi->pagesize));
+	printf("    imagelen	 %d\n", ntohl(fi->imagelen));
+	printf("    blockinfo	 %08x\n", ntohl((int)fi->blockinfo));
+
+	printf("  nr	imageblocks  imageoffs\n");
+	for (i = 0; i < UBI_BLOCK_IDENT_MAX; i++)
+		printf("    [%2d]   %08x   %08x\n", i,
+		       ntohl(fi->imageblocks[i]),
+		       ntohl(fi->imageoffs[i]));
+
+	for (i = 0; i < UBI_TIMESTAMPS; i++) {
+		if (!ntohl(fi->times[i]))
+			continue;
+		printf("time[%3d] = %08x %.3f sec\n", i, ntohl(fi->times[i]),
+		       (double)ntohl(fi->times[i]) / 500000000.0);
+	}
+
+	printf("crc32_table\n");
+	hexdump((char *)&fi->crc32_table, sizeof(fi->crc32_table));
+	printf("\npage_buf\n");
+	hexdump((char *)&fi->page_buf, sizeof(fi->page_buf));
+
+	printf("\n");
+
+}
+
+static void
+print_ubi_block_info(struct ubi_scan_info *fi,
+		     struct ubi_vid_hdr *bi, int nr)
+{
+	int i;
+	int unknown = 0;
+
+	printf("\nBINFO\n");
+
+	for (i = 0; i < nr; i++) {
+		if ((int)ubi32_to_cpu(bi[i].magic) != UBI_VID_HDR_MAGIC) {
+			printf("block=%d %08x\n",
+			       i, i * ntohl(fi->blocksize));
+#if 0
+			printf(".");
+			if ((unknown & 0x3f) == 0x3f)
+				printf("\n");
+			unknown++;
+#else
+			hexdump((char *)&bi[i],
+				sizeof(struct ubi_vid_hdr));
+#endif
+		} else {
+			if (unknown)
+				printf("\n");
+			printf("block=%d %08x\n"
+			       "    leb_ver=0x%x data_size=%d "
+			       "lnum=%d used_ebs=0x%x\n"
+			       "    data_crc=%08x hdr_crc=%08x\n",
+			       i, i * ntohl(fi->blocksize),
+			       ubi32_to_cpu(bi[i].leb_ver),
+			       ubi32_to_cpu(bi[i].data_size),
+			       ubi32_to_cpu(bi[i].lnum),
+			       ubi32_to_cpu(bi[i].used_ebs),
+			       ubi32_to_cpu(bi[i].data_crc),
+			       ubi32_to_cpu(bi[i].hdr_crc));
+			hexdump((char *)&bi[i],
+				sizeof(struct ubi_vid_hdr));
+			unknown = 0;
+		}
+	}
+}
+
+static int do_read(unsigned int memtop, char *buf, int buf_len __unused)
+{
+	unsigned long finfo_addr;
+	unsigned long binfo_addr;
+	unsigned long images_addr;
+	unsigned long nrblocks;
+	unsigned long bi_size;
+	unsigned long images_size;
+	struct ubi_scan_info *fi;
+	struct ubi_vid_hdr *bi;
+	char *images;
+	unsigned long memaddr = memtop - MEMSIZE;
+
+	print_status_help();
+
+	/* Read and print FINFO */
+	finfo_addr = MEMSIZE - CFG_IPLSIZE * 1024;
+
+	printf("read info at addr %08lx\n", finfo_addr);
+	fi = (struct ubi_scan_info *)(buf + finfo_addr);
+
+	binfo_addr  = ntohl((unsigned long)fi->blockinfo) - memaddr;
+	images_addr = ntohl((unsigned long)fi->images) - memaddr;
+	nrblocks    = ntohl(fi->nrblocks);
+
+	printf("BINFO %08lx\n", binfo_addr);
+
+	bi_size = nrblocks * sizeof(struct ubi_vid_hdr);
+	images_size = nrblocks * sizeof(unsigned int);
+
+	printf("FINFO\n");
+	print_ubi_scan_info(fi);
+	/* hexdump((char *)fi, sizeof(*fi)); */
+
+	/* Read and print BINFO */
+	bi = (struct ubi_vid_hdr *)(buf + binfo_addr);
+	print_ubi_block_info(fi, bi, nrblocks);
+
+	/* Read and print IMAGES */
+	images = buf + images_addr;
+	printf("\nIMAGES\n");
+	hexdump(images, images_size);
+
+	return 0;
+}
+
+int main(int argc, char *argv[])
+{
+	char buf[MEMSIZE];
+	FILE *fp;
+	int rc;
+
+	argp_parse(&argp, argc, argv, ARGP_IN_ORDER, 0, &g_args);
+
+	if (!g_args.arg1) {
+		fprintf(stderr, "Please specify a file "
+			"name for memory dump!\n");
+		exit(EXIT_FAILURE);
+	}
+
+	memset(buf, 0xAB, sizeof(buf));
+
+	fp = fopen(g_args.arg1, "r");
+	if (!fp)
+		exit(EXIT_FAILURE);
+	rc = fread(buf, 1, sizeof(buf), fp);
+	if (rc != sizeof(buf))
+		exit(EXIT_FAILURE);
+	fclose(fp);
+	do_read(g_args.memtop, buf, sizeof(buf));
+
+	exit(EXIT_SUCCESS);
+}
diff --git a/ubi-utils/src/ubiinfo/ubiipl.h b/ubi-utils/src/ubiinfo/ubiipl.h
new file mode 100644
index 0000000..3a8b900
--- /dev/null
+++ b/ubi-utils/src/ubiinfo/ubiipl.h
@@ -0,0 +1,87 @@
+#ifndef _UBI_IPL_H
+#define _UBI_IPL_H
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Constants calculated from the CFG_XXX defines
+ *
+ * Declaration of the loader function which is invoked by the
+ * assembler part of the IPL
+ */
+
+/* Size of IPL - is 4K for NAND and can also be 4K for NOR */
+#define IPL_SIZE	   4096
+
+/* Needed in asm code to upload the data, needed in C-code for CRC32 */
+#define IPL_RAMADDR	   (CFG_MEMTOP - IPL_SIZE)
+
+#if !defined(__ASSEMBLY__)
+
+#include <stdint.h>
+#include <mtd/ubi-header.h>
+
+/* Address of the flash info structure */
+#define FINFO_ADDR (struct ubi_scan_info *) (CFG_MEMTOP - CFG_IPLSIZE * 1024)
+
+/* Size of the flash info structure */
+#define FINFO_SIZE sizeof(struct ubi_scan_info)
+
+/* Blockinfo array address */
+#define BINFO_ADDR (struct ubi_vid_hdr *) ((void *)FINFO_ADDR + FINFO_SIZE)
+
+/* Number of erase blocks */
+#define NR_ERASE_BLOCKS	((CFG_FLASHSIZE * 1024) / CFG_BLOCKSIZE)
+
+/* Blockinfo size */
+#define BINFO_SIZE (NR_ERASE_BLOCKS * sizeof(struct ubi_vid_hdr))
+
+/* Images array address */
+#define IMAGES_ADDR (struct ubi_vid_hdr **) ((void *)BINFO_ADDR + BINFO_SIZE)
+
+/* Images array size */
+#define IMAGES_SIZE (NR_ERASE_BLOCKS * sizeof(unsigned int))
+
+/* Total size of flash info + blockinfo + images */
+#define INFO_SIZE ((FINFO_SIZE + BINFO_SIZE + IMAGES_SIZE) / sizeof(uint32_t))
+
+/* Load address of the SPL */
+#define SPL_ADDR (void *) ((void *)FINFO_ADDR - CFG_SPLCODE * 1024)
+
+#define IPL_SIZE_CRC32	   (IPL_SIZE - sizeof(uint32_t))
+#define IPL_RAMADDR_CRC32  ((void *)(IPL_RAMADDR + sizeof(uint32_t)))
+
+/*
+ * Linker script magic to ensure that load_spl() is linked to the
+ * right place
+ */
+#define __crc32	 __attribute__((__section__(".crc32")))
+#define __entry	 __attribute__((__section__(".entry.text")))
+#define __unused __attribute__((unused))
+
+#define MIN(x,y) ((x)<(y)?(x):(y))
+
+#define stop_on_error(x) \
+	{ while (1); }
+
+void __entry load_spl(void);
+void hardware_init(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif