summaryrefslogtreecommitdiff
path: root/ubi-utils/src/libbootenv/hashmap.c
diff options
context:
space:
mode:
authorFrank Haverkamp <haver@vnet.ibm.com>2006-06-14 11:53:59 +0200
committerFrank Haverkamp <haver@vnet.ibm.com>2006-10-31 15:06:06 +0100
commitf175083413f0f94de88def865eeb65e465ded389 (patch)
treef50ded679736272988ccce2a15d17fdeac2e09a5 /ubi-utils/src/libbootenv/hashmap.c
parent37f40f5574e04ae050507133ade8fe0e6bae2f0d (diff)
UBI - Unsorted Block Images
UBI (Latin: "where?") manages multiple logical volumes on a single flash device, specifically supporting NAND flash devices. UBI provides a flexible partitioning concept which still allows for wear-levelling across the whole flash device. In a sense, UBI may be compared to the Logical Volume Manager (LVM). Whereas LVM maps logical sector numbers to physical HDD sector numbers, UBI maps logical eraseblocks to physical eraseblocks. More information may be found in the UBI design documentation: ubidesign.pdf. Which can be found here: http://www.linux-mtd.infradead.org/doc/ubi.html Partitioning/Re-partitioning An UBI volume occupies a certain number of erase blocks. This is limited by a configured maximum volume size, which could also be viewed as the partition size. Each individual UBI volume's size can be changed independently of the other UBI volumes, provided that the sum of all volume sizes doesn't exceed a certain limit. UBI supports dynamic volumes and static volumes. Static volumes are read-only and their contents are protected by CRC check sums. Bad eraseblocks handling UBI transparently handles bad eraseblocks. When a physical eraseblock becomes bad, it is substituted by a good physical eraseblock, and the user does not even notice this. Scrubbing On a NAND flash bit flips can occur on any write operation, sometimes also on read. If bit flips persist on the device, at first they can still be corrected by ECC, but once they accumulate, correction will become impossible. Thus it is best to actively scrub the affected eraseblock, by first copying it to a free eraseblock and then erasing the original. The UBI layer performs this type of scrubbing under the covers, transparently to the UBI volume users. Erase Counts UBI maintains an erase count header per eraseblock. This frees higher-level layers (like file systems) from doing this and allows for centralized erase count management instead. The erase counts are used by the wear-levelling algorithm in the UBI layer. The algorithm itself is exchangeable. Booting from NAND For booting directly from NAND flash the hardware must at least be capable of fetching and executing a small portion of the NAND flash. Some NAND flash controllers have this kind of support. They usually limit the window to a few kilobytes in erase block 0. This "initial program loader" (IPL) must then contain sufficient logic to load and execute the next boot phase. Due to bad eraseblocks, which may be randomly scattered over the flash device, it is problematic to store the "secondary program loader" (SPL) statically. Also, due to bit-flips it may become corrupted over time. UBI allows to solve this problem gracefully by storing the SPL in a small static UBI volume. UBI volumes vs. static partitions UBI volumes are still very similar to static MTD partitions: * both consist of eraseblocks (logical eraseblocks in case of UBI volumes, and physical eraseblocks in case of static partitions; * both support three basic operations - read, write, erase. But UBI volumes have the following advantages over traditional static MTD partitions: * there are no eraseblock wear-leveling constraints in case of UBI volumes, so the user should not care about this; * there are no bit-flips and bad eraseblocks in case of UBI volumes. So, UBI volumes may be considered as flash devices with relaxed restrictions. Where can it be found? Documentation, kernel code and applications can be found in the MTD gits. What are the applications for? The applications help to create binary flash images for two purposes: pfi files (partial flash images) for in-system update of UBI volumes, and plain binary images, with or without OOB data in case of NAND, for a manufacturing step. Furthermore some tools are/and will be created that allow flash content analysis after a system has crashed. Who did UBI? The original ideas, where UBI is based on, were developed by Andreas Arnez, Frank Haverkamp and Thomas Gleixner. Josh W. Boyer and some others were involved too. The implementation of the kernel layer was done by Artem B. Bityutskiy. The user-space applications and tools were written by Oliver Lohmann with contributions from Frank Haverkamp, Andreas Arnez, and Artem. Joern Engel contributed a patch which modifies JFFS2 so that it can be run on a UBI volume. Thomas Gleixner did modifications to the NAND layer and also some to JFFS2 to make it work. Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
Diffstat (limited to 'ubi-utils/src/libbootenv/hashmap.c')
-rw-r--r--ubi-utils/src/libbootenv/hashmap.c412
1 files changed, 412 insertions, 0 deletions
diff --git a/ubi-utils/src/libbootenv/hashmap.c b/ubi-utils/src/libbootenv/hashmap.c
new file mode 100644
index 0000000..250f71f
--- /dev/null
+++ b/ubi-utils/src/libbootenv/hashmap.c
@@ -0,0 +1,412 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Oliver Lohmann
+ */
+
+#include <errno.h>
+#include <string.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include "error.h"
+#include "hashmap.h"
+#define DEFAULT_BUCKETS 4096
+
+#if 0
+#define INFO_MSG(fmt...) do { \
+ info_msg(fmt); \
+} while (0)
+#else
+#define INFO_MSG(fmt...)
+#endif
+
+struct hashentry {
+ char* key; /* key '0' term. str */
+ char* value; /* payload '0' term. str */
+
+ hashentry_t next;
+};
+
+struct hashmap {
+ size_t entries; /* current #entries */
+ size_t maxsize; /* no. of hash buckets */
+ hashentry_t* data; /* array of buckets */
+};
+
+static int
+is_empty(hashentry_t l)
+{
+ return l == NULL ? 1 : 0;
+}
+
+hashmap_t
+hashmap_new(void)
+{
+ hashmap_t res;
+ res = (hashmap_t) calloc(1, sizeof(struct hashmap));
+
+ if (res == NULL)
+ return NULL;
+
+ res->maxsize = DEFAULT_BUCKETS;
+ res->entries = 0;
+
+ res->data = (hashentry_t*)
+ calloc(1, res->maxsize * sizeof(struct hashentry));
+
+ if (res->data == NULL)
+ return NULL;
+
+ return res;
+}
+
+static hashentry_t
+new_entry(const char* key, const char* value)
+{
+ hashentry_t res;
+
+ res = (hashentry_t) calloc(1, sizeof(struct hashentry));
+
+ if (res == NULL)
+ return NULL;
+
+ /* allocate key and value and copy them */
+ res->key = strdup(key);
+ if (res->key == NULL) {
+ free(res);
+ return NULL;
+ }
+
+ res->value = strdup(value);
+ if (res->value == NULL) {
+ free(res->key);
+ free(res);
+ return NULL;
+ }
+
+ res->next = NULL;
+
+ return res;
+}
+
+static hashentry_t
+free_entry(hashentry_t e)
+{
+ if (!is_empty(e)) {
+ if(e->key != NULL) {
+ free(e->key);
+ }
+ if(e->value != NULL)
+ free(e->value);
+ free(e);
+ }
+
+ return NULL;
+}
+
+static hashentry_t
+remove_entry(hashentry_t l, const char* key, size_t* entries)
+{
+ hashentry_t lnext;
+ if (is_empty(l))
+ return NULL;
+
+ if(strcmp(l->key,key) == 0) {
+ lnext = l->next;
+ l = free_entry(l);
+ (*entries)--;
+ return lnext;
+ }
+
+ l->next = remove_entry(l->next, key, entries);
+
+ return l;
+}
+
+static hashentry_t
+insert_entry(hashentry_t l, hashentry_t e, size_t* entries)
+{
+ if (is_empty(l)) {
+ (*entries)++;
+ return e;
+ }
+
+ /* check for update */
+ if (strcmp(l->key, e->key) == 0) {
+ e->next = l->next;
+ l = free_entry(l);
+ return e;
+ }
+
+ l->next = insert_entry(l->next, e, entries);
+ return l;
+}
+
+static hashentry_t
+remove_all(hashentry_t l, size_t* entries)
+{
+ hashentry_t lnext;
+ if (is_empty(l))
+ return NULL;
+
+ lnext = l->next;
+ free_entry(l);
+ (*entries)--;
+
+ return remove_all(lnext, entries);
+}
+
+static const char*
+value_lookup(hashentry_t l, const char* key)
+{
+ if (is_empty(l))
+ return NULL;
+
+ if (strcmp(l->key, key) == 0)
+ return l->value;
+
+ return value_lookup(l->next, key);
+}
+
+static void
+print_all(hashentry_t l)
+{
+ if (is_empty(l)) {
+ printf("\n");
+ return;
+ }
+
+ printf("%s=%s", l->key, l->value);
+ if (!is_empty(l->next)) {
+ printf(",");
+ }
+
+ print_all(l->next);
+}
+
+static void
+keys_to_array(hashentry_t l, const char** a, size_t* i)
+{
+ if (is_empty(l))
+ return;
+
+ a[*i] = l->key;
+ (*i)++;
+
+ keys_to_array(l->next, a, i);
+}
+
+uint32_t
+hash_str(const char* str, uint32_t mapsize)
+{
+ uint32_t hash = 0;
+ uint32_t x = 0;
+ uint32_t i = 0;
+ size_t len = strlen(str);
+
+ for(i = 0; i < len; str++, i++) {
+ hash = (hash << 4) + (*str);
+ if((x = hash & 0xF0000000L) != 0) {
+ hash ^= (x >> 24);
+ hash &= ~x;
+ }
+ }
+
+ return (hash & 0x7FFFFFFF) % mapsize;
+}
+
+
+int
+hashmap_is_empty(hashmap_t map)
+{
+ if (map == NULL)
+ return -EINVAL;
+
+ return map->entries > 0 ? 1 : 0;
+}
+
+const char*
+hashmap_lookup(hashmap_t map, const char* key)
+{
+ uint32_t i;
+
+ if ((map == NULL) || (key == NULL))
+ return NULL;
+
+ i = hash_str(key, map->maxsize);
+
+ return value_lookup(map->data[i], key);
+}
+
+int
+hashmap_add(hashmap_t map, const char* key, const char* value)
+{
+ uint32_t i;
+ hashentry_t entry;
+
+ if ((map == NULL) || (key == NULL) || (value == NULL))
+ return -EINVAL;
+
+ i = hash_str(key, map->maxsize);
+ entry = new_entry(key, value);
+ if (entry == NULL)
+ return -ENOMEM;
+
+ map->data[i] = insert_entry(map->data[i],
+ entry, &map->entries);
+
+ INFO_MSG("HASH_ADD: chain[%d] key:%s val:%s",i, key, value);
+ return 0;
+}
+
+int
+hashmap_remove(hashmap_t map, const char* key)
+{
+ uint32_t i;
+
+ if ((map == NULL) || (key == NULL))
+ return -EINVAL;
+
+ i = hash_str(key, map->maxsize);
+ map->data[i] = remove_entry(map->data[i], key, &map->entries);
+
+ return 0;
+}
+
+size_t
+hashmap_size(hashmap_t map)
+{
+ if (map != NULL)
+ return map->entries;
+ else
+ return 0;
+}
+
+int
+hashmap_free(hashmap_t map)
+{
+ size_t i;
+
+ if (map == NULL)
+ return -EINVAL;
+
+ /* "children" first */
+ for(i = 0; i < map->maxsize; i++) {
+ map->data[i] = remove_all(map->data[i], &map->entries);
+ }
+ free(map->data);
+ free(map);
+
+ return 0;
+}
+
+int
+hashmap_dump(hashmap_t map)
+{
+ size_t i;
+ if (map == NULL)
+ return -EINVAL;
+
+ for(i = 0; i < map->maxsize; i++) {
+ if (map->data[i] != NULL) {
+ printf("[%d]: ", i);
+ print_all(map->data[i]);
+ }
+ }
+
+ return 0;
+}
+
+static const char**
+sort_key_vector(const char** a, size_t size)
+{
+ /* uses bubblesort */
+ size_t i, j;
+ const char* tmp;
+
+ if (size <= 0)
+ return a;
+
+ for (i = size - 1; i > 0; i--) {
+ for (j = 0; j < i; j++) {
+ if (strcmp(a[j], a[j+1]) > 0) {
+ tmp = a[j];
+ a[j] = a[j+1];
+ a[j+1] = tmp;
+ }
+ }
+ }
+ return a;
+}
+
+const char**
+hashmap_get_key_vector(hashmap_t map, size_t* size, int sort)
+{
+ const char** res;
+ size_t i, j;
+ *size = map->entries;
+
+ res = (const char**) malloc(*size * sizeof(char*));
+ if (res == NULL)
+ return NULL;
+
+ j = 0;
+ for(i=0; i < map->maxsize; i++) {
+ keys_to_array(map->data[i], res, &j);
+ }
+
+ if (sort)
+ res = sort_key_vector(res, *size);
+
+ return res;
+}
+
+int
+hashmap_key_is_in_vector(const char** vec, size_t size, const char* key)
+{
+ size_t i;
+ for (i = 0; i < size; i++) {
+ if (strcmp(vec[i], key) == 0) /* found */
+ return 1;
+ }
+
+ return 0;
+}
+
+const char**
+hashmap_get_update_key_vector(const char** vec1, size_t vec1_size,
+ const char** vec2, size_t vec2_size, size_t* res_size)
+{
+ const char** res;
+ size_t i, j;
+
+ *res_size = vec2_size;
+
+ res = (const char**) malloc(*res_size * sizeof(char*));
+ if (res == NULL)
+ return NULL;
+
+ /* get all keys from vec2 which are not set in vec1 */
+ j = 0;
+ for (i = 0; i < vec2_size; i++) {
+ if (!hashmap_key_is_in_vector(vec1, vec1_size, vec2[i]))
+ res[j++] = vec2[i];
+ }
+
+ *res_size = j;
+ return res;
+}