UBI - Unsorted Block Images

UBI (Latin: "where?") manages multiple logical volumes on a single
flash device, specifically supporting NAND flash devices. UBI provides
a flexible partitioning concept which still allows for wear-levelling
across the whole flash device.

In a sense, UBI may be compared to the Logical Volume Manager
(LVM). Whereas LVM maps logical sector numbers to physical HDD sector
numbers, UBI maps logical eraseblocks to physical eraseblocks.

More information may be found in the UBI design documentation:
ubidesign.pdf. Which can be found here:
http://www.linux-mtd.infradead.org/doc/ubi.html

Partitioning/Re-partitioning

  An UBI volume occupies a certain number of erase blocks. This is
  limited by a configured maximum volume size, which could also be
  viewed as the partition size. Each individual UBI volume's size can
  be changed independently of the other UBI volumes, provided that the
  sum of all volume sizes doesn't exceed a certain limit.

  UBI supports dynamic volumes and static volumes. Static volumes are
  read-only and their contents are protected by CRC check sums.

Bad eraseblocks handling

  UBI transparently handles bad eraseblocks. When a physical
  eraseblock becomes bad, it is substituted by a good physical
  eraseblock, and the user does not even notice this.

Scrubbing

  On a NAND flash bit flips can occur on any write operation,
  sometimes also on read. If bit flips persist on the device, at first
  they can still be corrected by ECC, but once they accumulate,
  correction will become impossible. Thus it is best to actively scrub
  the affected eraseblock, by first copying it to a free eraseblock
  and then erasing the original. The UBI layer performs this type of
  scrubbing under the covers, transparently to the UBI volume users.

Erase Counts

  UBI maintains an erase count header per eraseblock. This frees
  higher-level layers (like file systems) from doing this and allows
  for centralized erase count management instead. The erase counts are
  used by the wear-levelling algorithm in the UBI layer. The algorithm
  itself is exchangeable.

Booting from NAND

  For booting directly from NAND flash the hardware must at least be
  capable of fetching and executing a small portion of the NAND
  flash. Some NAND flash controllers have this kind of support. They
  usually limit the window to a few kilobytes in erase block 0. This
  "initial program loader" (IPL) must then contain sufficient logic to
  load and execute the next boot phase.

  Due to bad eraseblocks, which may be randomly scattered over the
  flash device, it is problematic to store the "secondary program
  loader" (SPL) statically. Also, due to bit-flips it may become
  corrupted over time. UBI allows to solve this problem gracefully by
  storing the SPL in a small static UBI volume.

UBI volumes vs. static partitions

  UBI volumes are still very similar to static MTD partitions:

    * both consist of eraseblocks (logical eraseblocks in case of UBI
      volumes, and physical eraseblocks in case of static partitions;
    * both support three basic operations - read, write, erase.

  But UBI volumes have the following advantages over traditional
  static MTD partitions:

    * there are no eraseblock wear-leveling constraints in case of UBI
      volumes, so the user should not care about this;
    * there are no bit-flips and bad eraseblocks in case of UBI volumes.

  So, UBI volumes may be considered as flash devices with relaxed
  restrictions.

Where can it be found?

  Documentation, kernel code and applications can be found in the MTD
  gits.

What are the applications for?

  The applications help to create binary flash images for two
  purposes: pfi files (partial flash images) for in-system update of
  UBI volumes, and plain binary images, with or without OOB data in
  case of NAND, for a manufacturing step. Furthermore some tools
  are/and will be created that allow flash content analysis after a
  system has crashed.

Who did UBI?

  The original ideas, where UBI is based on, were developed by Andreas
  Arnez, Frank Haverkamp and Thomas Gleixner. Josh W. Boyer and
  some others were involved too. The implementation of the kernel
  layer was done by Artem B. Bityutskiy. The user-space applications
  and tools were written by Oliver Lohmann with contributions from
  Frank Haverkamp, Andreas Arnez, and Artem. Joern Engel contributed a
  patch which modifies JFFS2 so that it can be run on a UBI
  volume. Thomas Gleixner did modifications to the NAND layer and also
  some to JFFS2 to make it work.

Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>

1 files changed, 959 insertions, 0 deletions

diff --git a/ubi-utils/src/libbootenv/bootenv.c b/ubi-utils/src/libbootenv/bootenv.c
new file mode 100644
index 0000000..b6a1191
--- /dev/null
+++ b/ubi-utils/src/libbootenv/bootenv.c
@@ -0,0 +1,959 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Oliver Lohmann
+ */
+
+#include <ctype.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <errno.h>
+#include <netinet/in.h>
+#include <sys/stat.h>
+#include <bootenv.h>
+
+#include "hashmap.h"
+#include "error.h"
+
+#define BOOTENV_MAXLINE 512 /* max line size of a bootenv.txt file */
+
+/* Structures */
+struct bootenv {
+	hashmap_t map;	 ///< Pointer to hashmap which holds data structure.
+};
+
+struct bootenv_list {
+	hashmap_t head; ///< Pointer to list which holds the data structure.
+};
+
+/**
+ * @brief Remove the '\n' from a given line.
+ * @param line	Input/Output line.
+ * @param size	Size of the line.
+ * @param fp	File Pointer.
+ * @return 0
+ * @return or error
+ */
+static int
+remove_lf(char *line, size_t size, FILE* fp)
+{
+	size_t i;
+
+	for (i = 0; i < size; i++) {
+		if (line[i] == '\n') {
+			line[i] = '\0';
+			return 0;
+		}
+	}
+
+	if (!feof(fp)) {
+		return BOOTENV_EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief Determine if a line contains only WS.
+ * @param line The line to process.
+ * @param size Size of input line.
+ * @return 1	Yes, only WS.
+ * @return 0	No, contains data.
+ */
+static int
+is_ws(const char *line, size_t size)
+{
+	size_t i = 0;
+
+	while (i < size) {
+		switch (line[i]) {
+			case '\n':
+				return 1;
+			case '#':
+				return 1;
+			case ' ':
+				i++;
+				continue;
+			case '\t':
+				i++;
+				continue;
+			default: /* any other char -> no cmnt */
+				return 0;
+		}
+	}
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * @brief Build a list from a comma seperated value string.
+ * @param list	Pointer to hashmap structure which shall store
+ *		the list.
+ * @param value	Comma seperated value string.
+ * @return 0
+ * @return or error.
+ */
+static int
+build_list_definition(hashmap_t list, const char *value)
+{
+	int rc = 0;
+	char *str = NULL;
+	char *ptr = NULL;
+	size_t len, i, j;
+
+	/* str: val1,val2 , val4,...,valN     */
+	len = strlen(value);
+	str = (char*) malloc((len+1) * sizeof(char));
+
+	/* 1. reformat string: remove spaces */
+	for (i = 0, j = 0; i < len; i++) {
+		if (value[i] == ' ')
+			continue;
+
+		str[j] = value[i];
+		j++;
+	}
+	str[j] = '\0';
+
+	/* str: val1,val2,val4,...,valN\0*/
+	/* 2. replace ',' seperator with '\0' */
+	len = strlen(str);
+	for (i = 0; i < len; i++) {
+		if (str[i] == ',') {
+			str[i] = '\0';
+		}
+	}
+
+	/* str: val1\0val2\0val4\0...\0valN\0*/
+	/* 3. insert definitions into a hash map, using it like a list */
+	i = j = 0;
+	ptr = str;
+	while (((i = strlen(ptr)) > 0) && (j < len)) {
+		rc = hashmap_add(list, ptr, "");
+		if (rc != 0) {
+			free(str);
+			return rc;
+		}
+		j += i+1;
+		if (j < len)
+			ptr += i+1;
+	}
+
+	free(str);
+	return rc;
+}
+
+/**
+ * @brief Extract a key value pair and add it to a hashmap
+ * @param str	Input string which contains a key value pair.
+ * @param env	The updated handle which contains the new pair.
+ * @return 0
+ * @return or error
+ * @note The input string format is: "key=value"
+ */
+static int
+extract_pair(const char *str, bootenv_t env)
+{
+	int rc = 0;
+	char *key = NULL;
+	char *val = NULL;
+
+	key = strdup(str);
+	if (key == NULL)
+		return -ENOMEM;
+
+	val = strstr(key, "=");
+	if (val == NULL) {
+		rc = BOOTENV_EBADENTRY;
+		goto err;
+	}
+
+	*val = '\0'; /* split strings */
+	val++;
+	rc = bootenv_set(env, key, val);
+
+err:
+	free(key);
+	return rc;
+}
+
+int
+bootenv_destroy(bootenv_t* env)
+{
+	int rc = 0;
+
+	if (env == NULL || *env == NULL)
+		return -EINVAL;
+
+	bootenv_t tmp = *env;
+
+	rc = hashmap_free(tmp->map);
+	if (rc != 0)
+		return rc;
+
+	free(tmp);
+	return rc;
+}
+
+int
+bootenv_create(bootenv_t* env)
+{
+	bootenv_t res;
+	res = (bootenv_t) calloc(1, sizeof(struct bootenv));
+
+	if (res == NULL)
+		return -ENOMEM;
+
+	res->map = hashmap_new();
+
+	if (res->map == NULL) {
+		free(res);
+		return -ENOMEM;
+	}
+
+	*env = res;
+
+	return 0;
+}
+
+
+/**
+ * @brief Read a formatted buffer and scan it for valid bootenv
+ *	  key/value pairs. Add those pairs into a hashmap.
+ * @param env	Hashmap which shall be used to hold the data.
+ * @param buf	Formatted buffer.
+ * @param size	Size of the buffer.
+ * @return 0
+ * @return or error
+ */
+static int
+rd_buffer(bootenv_t env, const char *buf, size_t size)
+{
+	const char *curr = buf;	/* ptr to current key/value pair */
+	uint32_t i = 0;		/* current length */
+	uint32_t j = 0;		/* processed chars */
+	uint32_t items = 0;	/* processed items */
+	int rc = 0;
+
+	if (buf[size-1] != '\0') {
+		return BOOTENV_EFMT;
+	}
+
+	while ((i = strlen(curr)) != 0) {
+		/* there is a key value pair remaining */
+		rc = extract_pair(curr, env);
+		if (rc != 0) {
+			rc = BOOTENV_EINVAL;
+			return rc;
+		}
+		items++;
+
+		j += i;
+		if (j >= size)
+			return 0; /* finished, end of buffer */
+		curr += i + 1;
+	}
+
+	return 0;
+}
+
+/**
+ * If we have a single file containing the boot-parameter size should
+ * be specified either as the size of the file or as BOOTENV_MAXSIZE.
+ * If the bootparameter are in the middle of a file we need the exact
+ * length of the data.
+ */
+int
+bootenv_read(FILE* fp, bootenv_t env, size_t size)
+{
+	int rc;
+	char *buf = NULL;
+	size_t i = 0;
+
+	if ((fp == NULL) || (env == NULL))
+		return -EINVAL;
+
+	/* allocate temp buffer */
+	buf = (char*) calloc(1, size * sizeof(char));
+	if (buf == NULL)
+		return -ENOMEM;
+
+	/* FIXME Andreas, please review this I removed size-1 and
+	 * replaced it by just size, I saw the kernel image starting
+	 * with a 0x0060.... and not with the 0x60.... what it should
+	 * be. Is this a tools problem or is it a problem here where
+	 * fp is moved not to the right place due to the former size-1
+	 * here.
+	 */
+	while((i < size) && (!feof(fp))) {
+		int c = fgetc(fp);
+
+		if (c == EOF) {
+			buf[i++] = '\0';
+			break;	/* we have enough */
+		}
+
+		/* log_msg("%c", c); */	/* FIXME DBG */
+
+		buf[i++] = c;
+		if (ferror(fp)) {
+			rc = -EIO;
+			goto err;
+		}
+	}
+
+	/* transfer to hashmap */
+	rc = rd_buffer(env, buf, size);
+
+	/* FIXME DBG */
+	/* log_msg("\n%s:%d rc=%d\n", __func__, __LINE__, rc); */
+
+err:
+	free(buf);
+	return rc;
+}
+
+
+
+int
+bootenv_read_txt(FILE* fp, bootenv_t env)
+{
+	int rc = 0;
+	char *buf = NULL;
+	char *line = NULL;
+	char *lstart = NULL;
+	char *curr = NULL;
+	size_t len;
+	size_t size;
+
+	if ((fp == NULL) || (env == NULL))
+		return -EINVAL;
+
+	size = BOOTENV_MAXSIZE;
+
+	/* allocate temp buffers */
+	buf = (char*) calloc(1, size * sizeof(char));
+	lstart = line = (char*) calloc(1, size * sizeof(char));
+	if ((buf == NULL)  || (line == NULL)) {
+		rc = -ENOMEM;
+		goto err;
+	}
+
+	curr = buf;
+	while ((line = fgets(line, size, fp)) != NULL) {
+		if (is_ws(line, size)) {
+			continue;
+		}
+		rc = remove_lf(line, BOOTENV_MAXSIZE, fp);
+		if (rc != 0) {
+			goto err;
+		}
+
+		/* copy new line to binary buffer */
+		len = strlen(line);
+		if (len > size) {
+			rc = -EFBIG;
+			goto err;
+		}
+		size -= len; /* track remaining space */
+
+		memcpy(curr, line, len);
+		curr += len + 1; /* for \0 seperator */
+	}
+
+	rc = rd_buffer(env, buf, BOOTENV_MAXSIZE);
+err:
+	if (buf != NULL)
+		free(buf);
+	if (lstart != NULL)
+		free(lstart);
+	return rc;
+}
+
+static int
+fill_output_buffer(bootenv_t env, char *buf, size_t buf_size_max,
+		size_t *written)
+{
+	int rc = 0;
+	size_t keys_size, i;
+	size_t wr = 0;
+	const char **keys = NULL;
+	const char *val = NULL;
+
+	rc = bootenv_get_key_vector(env, &keys_size, 1, &keys);
+	if (rc != 0)
+		goto err;
+
+	for (i = 0; i < keys_size; i++) {
+		if (wr > BOOTENV_MAXSIZE) {
+			rc = -ENOSPC;
+			goto err;
+		}
+
+		rc = bootenv_get(env, keys[i], &val);
+		if (rc != 0)
+			goto err;
+
+		wr += snprintf(buf + wr, BOOTENV_MAXSIZE - wr,
+				"%s=%s", keys[i], val);
+		wr++; /* for \0 */
+	}
+
+	*written = wr;
+
+err:
+	if (keys != NULL)
+		free(keys);
+
+	return rc;
+}
+
+int
+bootenv_write(FILE* fp, bootenv_t env)
+{
+	int rc = 0;
+	size_t size = 0;
+	char *buf = NULL;
+
+	if ((fp == NULL) || (env == NULL))
+		return -EINVAL;
+
+	buf = (char*) calloc(1, BOOTENV_MAXSIZE * sizeof(char));
+	if (buf == NULL)
+		return -ENOMEM;
+
+	rc = fill_output_buffer(env, buf, BOOTENV_MAXSIZE, &size);
+	if (rc != 0)
+		goto err;
+
+	if (fwrite(buf, size, 1, fp) != 1) {
+		rc = -EIO;
+		goto err;
+	}
+
+err:
+	if (buf != NULL)
+		free(buf);
+	return rc;
+}
+
+int
+bootenv_size(bootenv_t env, size_t *size)
+{
+	int rc = 0;
+	char *buf = NULL;
+
+	if (env == NULL)
+		return -EINVAL;
+
+	buf = (char*) calloc(1, BOOTENV_MAXSIZE * sizeof(char));
+	if (buf == NULL)
+		return -ENOMEM;
+
+	rc = fill_output_buffer(env, buf, BOOTENV_MAXSIZE, size);
+	if (rc != 0)
+		goto err;
+
+err:
+	if (buf != NULL)
+		free(buf);
+	return rc;
+}
+
+int
+bootenv_write_txt(FILE* fp, bootenv_t env)
+{
+	int rc = 0;
+	size_t size, wr, i;
+	const char **keys = NULL;
+	const char *key = NULL;
+	const char *val = NULL;
+
+	if ((fp == NULL) || (env == NULL))
+		return -EINVAL;
+
+	rc = bootenv_get_key_vector(env, &size, 1, &keys);
+	if (rc != 0)
+		goto err;
+
+	for (i = 0; i < size; i++) {
+		key = keys[i];
+		rc = bootenv_get(env, key, &val);
+		if (rc != 0)
+			goto err;
+
+		wr = fprintf(fp, "%s=%s\n", key, val);
+		if (wr != strlen(key) + strlen(val) + 2) {
+			rc = -EIO;
+			goto err;
+		}
+	}
+
+err:
+	if (keys != NULL)
+		free(keys);
+	return rc;
+}
+
+int
+bootenv_valid(bootenv_t env)
+{
+	/* @FIXME No sanity check implemented. */
+	return 0;
+}
+
+int
+bootenv_copy_bootenv(bootenv_t in, bootenv_t *out)
+{
+	int rc = 0;
+	const char *tmp = NULL;
+	const char **keys = NULL;
+	size_t vec_size, i;
+
+	if ((in == NULL) || (out == NULL))
+		return -EINVAL;
+
+	/* purge output var for sure... */
+	rc = bootenv_destroy(out);
+	if (rc != 0)
+		return rc;
+
+	/* create the new map  */
+	rc = bootenv_create(out);
+	if (rc != 0)
+		goto err;
+
+	/* get the key list from the input map */
+	rc = bootenv_get_key_vector(in, &vec_size, 0, &keys);
+	if (rc != 0)
+		goto err;
+
+	if (vec_size != hashmap_size(in->map)) {
+		rc = BOOTENV_ECOPY;
+		goto err;
+	}
+
+	/* make a deep copy of the hashmap */
+	for (i = 0; i < vec_size; i++) {
+		rc = bootenv_get(in, keys[i], &tmp);
+		if (rc != 0)
+			goto err;
+
+		rc = bootenv_set(*out, keys[i], tmp);
+		if (rc != 0)
+			goto err;
+	}
+
+err:
+	if (keys != NULL)
+		free(keys);
+
+	return rc;
+}
+
+/* ------------------------------------------------------------------------- */
+
+
+int
+bootenv_pdd_keep(bootenv_t env_old, bootenv_t env_new, bootenv_t *env_res,
+		int *warnings, char *err_buf, size_t err_buf_size)
+{
+	bootenv_list_t l_old = NULL;
+	bootenv_list_t l_new = NULL;
+	const char *pdd_old = NULL;
+	const char *pdd_new = NULL;
+	const char *tmp = NULL;
+	const char **vec_old = NULL;
+	const char **vec_new = NULL;
+	const char **pdd_up_vec = NULL;
+	size_t vec_old_size, vec_new_size, pdd_up_vec_size, i;
+	int rc = 0;
+
+	if ((env_old == NULL) || (env_new == NULL) || (env_res == NULL))
+		return -EINVAL;
+
+	/* get the pdd strings, e.g.:
+	 * pdd_old=a,b,c
+	 * pdd_new=a,c,d,e */
+	rc = bootenv_get(env_old, "pdd", &pdd_old);
+	if (rc != 0)
+		goto err;
+	rc = bootenv_get(env_new, "pdd", &pdd_new);
+	if (rc != 0)
+		goto err;
+
+	/* put it into a list and then convert it to an vector */
+	rc = bootenv_list_create(&l_old);
+	if (rc != 0)
+		goto err;
+	rc  = bootenv_list_create(&l_new);
+	if (rc != 0)
+		goto err;
+
+	rc = bootenv_list_import(l_old, pdd_old);
+	if (rc != 0)
+		goto err;
+
+	rc = bootenv_list_import(l_new, pdd_new);
+	if (rc != 0)
+		goto err;
+
+	rc = bootenv_list_to_vector(l_old, &vec_old_size, &vec_old);
+	if (rc != 0)
+		goto err;
+
+	rc = bootenv_list_to_vector(l_new, &vec_new_size, &vec_new);
+	if (rc != 0)
+		goto err;
+
+	rc = bootenv_copy_bootenv(env_new, env_res);
+	if (rc != 0)
+		goto err;
+
+	/* calculate the update vector between the old and new pdd */
+	pdd_up_vec = hashmap_get_update_key_vector(vec_old, vec_old_size,
+			vec_new, vec_new_size, &pdd_up_vec_size);
+
+	if (pdd_up_vec == NULL) {
+		rc = -ENOMEM;
+		goto err;
+	}
+
+	if (pdd_up_vec_size != 0) {
+		/* need to warn the user about the unset of
+		 * some pdd/bootenv values */
+		*warnings = BOOTENV_WPDD_STRING_DIFFERS;
+
+		/* remove all entries in the new bootenv load */
+		for (i = 0; i < pdd_up_vec_size; i++) {
+			bootenv_unset(*env_res, pdd_up_vec[i]);
+		}
+	}
+
+	/* generate the keep array and copy old pdd values to new bootenv */
+	for (i = 0; i < vec_old_size; i++) {
+		rc = bootenv_get(env_old, vec_old[i], &tmp);
+		if (rc != 0) {
+			rc = BOOTENV_EPDDINVAL;
+			goto err;
+		}
+		rc = bootenv_set(*env_res, vec_old[i], tmp);
+		if (rc != 0) {
+			goto err;
+		}
+	}
+	/* put the old pdd string into the result map */
+	rc = bootenv_set(*env_res, "pdd", pdd_old);
+	if (rc != 0) {
+		goto err;
+	}
+
+
+err:
+	if (vec_old != NULL)
+		free(vec_old);
+	if (vec_new != NULL)
+		free(vec_new);
+	if (pdd_up_vec != NULL)
+		free(pdd_up_vec);
+
+	bootenv_list_destroy(&l_old);
+	bootenv_list_destroy(&l_new);
+	return rc;
+}
+
+
+int
+bootenv_pdd_overwrite(bootenv_t env_old, bootenv_t env_new,
+		      bootenv_t *env_res, int *warnings,
+		      char *err_buf, size_t err_buf_size)
+{
+	if ((env_old == NULL) || (env_new == NULL) || (env_res == NULL))
+		return -EINVAL;
+
+	return bootenv_copy_bootenv(env_new, env_res);
+}
+
+int
+bootenv_pdd_merge(bootenv_t env_old, bootenv_t env_new, bootenv_t *env_res,
+		int *warnings, char *err_buf, size_t err_buf_size)
+{
+	if ((env_old == NULL) || (env_new == NULL) || (env_res == NULL))
+		return -EINVAL;
+
+	snprintf(err_buf, err_buf_size, "The PDD merge operation is not "
+			"implemented. Contact: <oliloh@de.ibm.com>");
+
+	return BOOTENV_ENOTIMPL;
+}
+
+/* ------------------------------------------------------------------------- */
+
+int
+bootenv_get(bootenv_t env, const char *key, const char **value)
+{
+	if (env == NULL)
+		return -EINVAL;
+
+	*value = hashmap_lookup(env->map, key);
+	if (*value == NULL)
+		return BOOTENV_ENOTFOUND;
+
+	return 0;
+}
+
+int
+bootenv_get_num(bootenv_t env, const char *key, uint32_t *value)
+{
+	char *endptr = NULL;
+	const char *str;
+
+	if (env == NULL)
+		return 0;
+
+	str = hashmap_lookup(env->map, key);
+	if (!str)
+		return -EINVAL;
+
+	*value = strtoul(str, &endptr, 0);
+
+	if (*endptr == '\0') {
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+int
+bootenv_set(bootenv_t env, const char *key, const char *value)
+{
+	if (env == NULL)
+		return -EINVAL;
+
+	return hashmap_add(env->map, key, value);
+}
+
+int
+bootenv_unset(bootenv_t env, const char *key)
+{
+	if (env == NULL)
+		return -EINVAL;
+
+	return hashmap_remove(env->map, key);
+}
+
+int
+bootenv_get_key_vector(bootenv_t env, size_t* size, int sort,
+		       const char ***vector)
+{
+	if ((env == NULL) || (size == NULL))
+		return -EINVAL;
+
+	*vector = hashmap_get_key_vector(env->map, size, sort);
+
+	if (*vector == NULL)
+		return -EINVAL;
+
+	return 0;
+}
+
+int
+bootenv_dump(bootenv_t env)
+{
+	if (env == NULL)
+		return -EINVAL;
+
+	return hashmap_dump(env->map);
+}
+
+int
+bootenv_list_create(bootenv_list_t *list)
+{
+	bootenv_list_t res;
+	res = (bootenv_list_t) calloc(1, sizeof(struct bootenv_list));
+
+	if (res == NULL)
+		return -ENOMEM;
+
+	res->head = hashmap_new();
+
+	if (res->head == NULL) {
+		free(res);
+		return -ENOMEM;
+	}
+
+	*list = res;
+	return 0;
+}
+
+int
+bootenv_list_destroy(bootenv_list_t *list)
+{
+	int rc = 0;
+
+	if (list == NULL)
+		return -EINVAL;
+
+	bootenv_list_t tmp = *list;
+	if (tmp == 0)
+		return 0;
+
+	rc = hashmap_free(tmp->head);
+	if (rc != 0)
+		return rc;
+
+	free(tmp);
+	*list = NULL;
+	return 0;
+}
+
+int
+bootenv_list_import(bootenv_list_t list, const char *str)
+{
+	if (list == NULL)
+		return -EINVAL;
+
+	return build_list_definition(list->head, str);
+}
+
+int
+bootenv_list_export(bootenv_list_t list, char **string)
+{
+	size_t size, i, j, bufsize, tmp, rc = 0;
+	const char **items;
+
+	if (list == NULL)
+		return -EINVAL;
+
+	bufsize = BOOTENV_MAXLINE;
+	char *res = (char*) malloc(bufsize * sizeof(char));
+	if (res == NULL)
+		return -ENOMEM;
+
+	rc = bootenv_list_to_vector(list, &size, &items);
+	if (rc != 0) {
+		goto err;
+	}
+
+	j = 0;
+	for (i = 0; i < size; i++) {
+		tmp = strlen(items[i]);
+		if (j >= bufsize) {
+			bufsize += BOOTENV_MAXLINE;
+			res = (char*) realloc(res, bufsize * sizeof(char));
+			if (res == NULL)  {
+				rc = -ENOMEM;
+				goto err;
+			}
+		}
+		memcpy(res + j, items[i], tmp);
+		j += tmp;
+		if (i < (size - 1)) {
+			res[j] = ',';
+			j++;
+		}
+	}
+	j++;
+	res[j] = '\0';
+	free(items);
+	*string = res;
+	return 0;
+err:
+	free(items);
+	return rc;
+}
+
+int
+bootenv_list_add(bootenv_list_t list, const char *item)
+{
+	if ((list == NULL) || (item == NULL))
+		return -EINVAL;
+
+	return hashmap_add(list->head, item, "");
+}
+
+int
+bootenv_list_remove(bootenv_list_t list, const char *item)
+{
+	if ((list == NULL) || (item == NULL))
+		return -EINVAL;
+
+	return hashmap_remove(list->head, item);
+}
+
+int
+bootenv_list_is_in(bootenv_list_t list, const char *item)
+{
+	if ((list == NULL) || (item == NULL))
+		return -EINVAL;
+
+	return hashmap_lookup(list->head, item) != NULL ? 1 : 0;
+}
+
+int
+bootenv_list_to_vector(bootenv_list_t list, size_t *size, const char ***vector)
+{
+	if ((list == NULL) || (size == NULL))
+		return -EINVAL;
+
+	*vector = hashmap_get_key_vector(list->head, size, 1);
+	if (*vector == NULL)
+		return -ENOMEM;
+
+	return 0;
+}
+
+int
+bootenv_list_to_num_vector(bootenv_list_t list, size_t *size,
+		uint32_t **vector)
+{
+	int rc = 0;
+	size_t i;
+	uint32_t* res = NULL;
+	char *endptr = NULL;
+	const char **a = NULL;
+
+	rc = bootenv_list_to_vector(list, size, &a);
+	if (rc != 0)
+		goto err;
+
+	res = (uint32_t*) malloc (*size * sizeof(uint32_t));
+	if (!res)
+		goto err;
+
+	for (i = 0; i < *size; i++) {
+		res[i] = strtoul(a[i], &endptr, 0);
+		if (*endptr != '\0')
+			goto err;
+	}
+
+	if (a)
+		free(a);
+	*vector = res;
+	return 0;
+
+err:
+	if (a)
+		free(a);
+	if (res)
+		free(res);
+	return rc;
+}