summaryrefslogtreecommitdiff
path: root/ubi-utils/src/bin2nand
diff options
context:
space:
mode:
authorFrank Haverkamp <haver@vnet.ibm.com>2006-06-14 11:53:59 +0200
committerFrank Haverkamp <haver@vnet.ibm.com>2006-10-31 15:06:06 +0100
commitf175083413f0f94de88def865eeb65e465ded389 (patch)
treef50ded679736272988ccce2a15d17fdeac2e09a5 /ubi-utils/src/bin2nand
parent37f40f5574e04ae050507133ade8fe0e6bae2f0d (diff)
UBI - Unsorted Block Images
UBI (Latin: "where?") manages multiple logical volumes on a single flash device, specifically supporting NAND flash devices. UBI provides a flexible partitioning concept which still allows for wear-levelling across the whole flash device. In a sense, UBI may be compared to the Logical Volume Manager (LVM). Whereas LVM maps logical sector numbers to physical HDD sector numbers, UBI maps logical eraseblocks to physical eraseblocks. More information may be found in the UBI design documentation: ubidesign.pdf. Which can be found here: http://www.linux-mtd.infradead.org/doc/ubi.html Partitioning/Re-partitioning An UBI volume occupies a certain number of erase blocks. This is limited by a configured maximum volume size, which could also be viewed as the partition size. Each individual UBI volume's size can be changed independently of the other UBI volumes, provided that the sum of all volume sizes doesn't exceed a certain limit. UBI supports dynamic volumes and static volumes. Static volumes are read-only and their contents are protected by CRC check sums. Bad eraseblocks handling UBI transparently handles bad eraseblocks. When a physical eraseblock becomes bad, it is substituted by a good physical eraseblock, and the user does not even notice this. Scrubbing On a NAND flash bit flips can occur on any write operation, sometimes also on read. If bit flips persist on the device, at first they can still be corrected by ECC, but once they accumulate, correction will become impossible. Thus it is best to actively scrub the affected eraseblock, by first copying it to a free eraseblock and then erasing the original. The UBI layer performs this type of scrubbing under the covers, transparently to the UBI volume users. Erase Counts UBI maintains an erase count header per eraseblock. This frees higher-level layers (like file systems) from doing this and allows for centralized erase count management instead. The erase counts are used by the wear-levelling algorithm in the UBI layer. The algorithm itself is exchangeable. Booting from NAND For booting directly from NAND flash the hardware must at least be capable of fetching and executing a small portion of the NAND flash. Some NAND flash controllers have this kind of support. They usually limit the window to a few kilobytes in erase block 0. This "initial program loader" (IPL) must then contain sufficient logic to load and execute the next boot phase. Due to bad eraseblocks, which may be randomly scattered over the flash device, it is problematic to store the "secondary program loader" (SPL) statically. Also, due to bit-flips it may become corrupted over time. UBI allows to solve this problem gracefully by storing the SPL in a small static UBI volume. UBI volumes vs. static partitions UBI volumes are still very similar to static MTD partitions: * both consist of eraseblocks (logical eraseblocks in case of UBI volumes, and physical eraseblocks in case of static partitions; * both support three basic operations - read, write, erase. But UBI volumes have the following advantages over traditional static MTD partitions: * there are no eraseblock wear-leveling constraints in case of UBI volumes, so the user should not care about this; * there are no bit-flips and bad eraseblocks in case of UBI volumes. So, UBI volumes may be considered as flash devices with relaxed restrictions. Where can it be found? Documentation, kernel code and applications can be found in the MTD gits. What are the applications for? The applications help to create binary flash images for two purposes: pfi files (partial flash images) for in-system update of UBI volumes, and plain binary images, with or without OOB data in case of NAND, for a manufacturing step. Furthermore some tools are/and will be created that allow flash content analysis after a system has crashed. Who did UBI? The original ideas, where UBI is based on, were developed by Andreas Arnez, Frank Haverkamp and Thomas Gleixner. Josh W. Boyer and some others were involved too. The implementation of the kernel layer was done by Artem B. Bityutskiy. The user-space applications and tools were written by Oliver Lohmann with contributions from Frank Haverkamp, Andreas Arnez, and Artem. Joern Engel contributed a patch which modifies JFFS2 so that it can be run on a UBI volume. Thomas Gleixner did modifications to the NAND layer and also some to JFFS2 to make it work. Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
Diffstat (limited to 'ubi-utils/src/bin2nand')
-rw-r--r--ubi-utils/src/bin2nand/bin2nand.c343
-rw-r--r--ubi-utils/src/bin2nand/nandecc.c159
-rw-r--r--ubi-utils/src/bin2nand/nandecc.h11
3 files changed, 513 insertions, 0 deletions
diff --git a/ubi-utils/src/bin2nand/bin2nand.c b/ubi-utils/src/bin2nand/bin2nand.c
new file mode 100644
index 0000000..5224e3b
--- /dev/null
+++ b/ubi-utils/src/bin2nand/bin2nand.c
@@ -0,0 +1,343 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Oliver Lohmann
+ */
+
+/*
+ * Create a flashable NAND image from a binary image
+ *
+ * History:
+ * 1.0: Initial release (tglx)
+ *
+ * 1.1: Understands hex and dec input parameters (tglx)
+ * 1.2: Generates separated OOB data, if needed. (oloh)
+ * 1.3: Padds data/oob to a given size. (oloh)
+ *
+ */
+
+#include <unistd.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <argp.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <errno.h>
+
+#include "error.h"
+#include "config.h"
+#include "nandecc.h"
+
+#define CHECK_ENDP(option, endp) do { \
+ if (*endp) { \
+ fprintf(stderr, \
+ "Parse error option \'%s\'. " \
+ "No correct numeric value.\n" \
+ , option); \
+ exit(EXIT_FAILURE); \
+ } \
+} while(0)
+
+typedef enum action_t {
+ ACT_NORMAL = 0x00000001,
+} action_t;
+
+#define PAGESIZE 2048
+#define PADDING 0 /* 0 means, do not adjust anything */
+#define BUFSIZE 4096
+
+const char *argp_program_version = PACKAGE_VERSION;
+const char *argp_program_bug_address = PACKAGE_BUGREPORT;
+static char doc[] = "\nVersion: " PACKAGE_VERSION "\n\tBuilt on "
+ BUILD_CPU" "BUILD_OS" at "__DATE__" "__TIME__"\n"
+ "\n"
+ "bin2nand - a tool for adding OOB information to a "
+ "binary input file.\n";
+
+static const char copyright [] __attribute__((unused)) =
+ "FIXME: insert license type."; /* FIXME */
+
+static struct argp_option options[] = {
+ { name: "copyright", key: 'c', arg: NULL, flags: 0,
+ doc: "Print copyright information.",
+ group: 1 },
+
+ { name: "pagesize", key: 'p', arg: "<num>", flags: 0,
+ doc: "Pagesize in Byte/Mi/ki. Default: 2048",
+ group: 1 },
+
+ { name: "padding", key: 'j', arg: "<num>", flags: 0,
+ doc: "Padding in Byte/Mi/ki. Default: no padding",
+ group: 1 },
+
+ /* Output options */
+ { name: NULL, key: 0, arg: NULL, flags: 0,
+ doc: "Output settings:",
+ group: 2 },
+
+ { name: "output", key: 'o', arg: "<fname>", flags: 0,
+ doc: "Output filename. Interleaved Data/OOB if output-oob not "
+ "specified.",
+ group: 2 },
+
+ { name: "output-oob", key: 'q', arg: "<fname>", flags: 0,
+ doc: "Write OOB data in separate file.",
+ group: 2 },
+
+ { name: NULL, key: 0, arg: NULL, flags: 0, doc: NULL, group: 0 },
+};
+
+typedef struct myargs {
+ action_t action;
+
+ size_t pagesize;
+ size_t padding;
+
+ FILE* fp_in;
+ char *file_out_data; /* Either: Data and OOB interleaved
+ or plain data */
+ char *file_out_oob; /* OOB Data only. */
+
+ /* special stuff needed to get additional arguments */
+ char *arg1;
+ char **options; /* [STRING...] */
+} myargs;
+
+
+static int ustrtoull(const char *cp, char **endp, unsigned int base)
+{
+ unsigned long long res = strtoull(cp, endp, base);
+
+ switch (**endp) {
+ case 'G':
+ res *= 1024;
+ case 'M':
+ res *= 1024;
+ case 'k':
+ case 'K':
+ res *= 1024;
+ /* "Ki", "ki", "Mi" or "Gi" are to be used. */
+ if ((*endp)[1] == 'i')
+ (*endp) += 2;
+ }
+ return res;
+}
+
+static error_t
+parse_opt(int key, char *arg, struct argp_state *state)
+{
+ int err = 0;
+ char* endp;
+
+ myargs *args = state->input;
+
+ switch (key) {
+ case 'p': /* pagesize */
+ args->pagesize = (size_t) ustrtoull(arg, &endp, 0);
+ CHECK_ENDP("p", endp);
+ break;
+ case 'j': /* padding */
+ args->padding = (size_t) ustrtoull(arg, &endp, 0);
+ CHECK_ENDP("j", endp);
+ break;
+ case 'o': /* output */
+ args->file_out_data = arg;
+ break;
+ case 'q': /* output oob */
+ args->file_out_oob = arg;
+ break;
+ case ARGP_KEY_ARG: /* input file */
+ args->fp_in = fopen(arg, "rb");
+ if ((args->fp_in) == NULL) {
+ err_quit("Cannot open file %s for input\n", arg);
+ }
+ args->arg1 = arg;
+ args->options = &state->argv[state->next];
+ state->next = state->argc;
+ break;
+ case ARGP_KEY_END:
+ if (err) {
+ err_msg("\n");
+ argp_usage(state);
+ exit(EXIT_FAILURE);
+ }
+ break;
+ default:
+ return(ARGP_ERR_UNKNOWN);
+ }
+
+ return 0;
+}
+
+static struct argp argp = {
+ options: options,
+ parser: parse_opt,
+ args_doc: 0,
+ doc: doc,
+ children: NULL,
+ help_filter: NULL,
+ argp_domain: NULL,
+};
+
+static int
+process_page(uint8_t* buf, size_t pagesize,
+ FILE *fp_data, FILE* fp_oob, size_t* written)
+{
+ int eccpoi, oobsize;
+ size_t i;
+ uint8_t oobbuf[64];
+
+ memset(oobbuf, 0xff, sizeof(oobbuf));
+
+ switch(pagesize) {
+ case 2048: oobsize = 64; eccpoi = 64 / 2; break;
+ case 512: oobsize = 16; eccpoi = 16 / 2; break;
+ default:
+ err_msg("Unsupported page size: %d\n", pagesize);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < pagesize; i += 256, eccpoi += 3) {
+ oobbuf[eccpoi++] = 0x0;
+ /* Calculate ECC */
+ nand_calculate_ecc(&buf[i], &oobbuf[eccpoi]);
+ }
+
+ /* write data */
+ *written += fwrite(buf, 1, pagesize, fp_data);
+
+ /* either separate oob or interleave with data */
+ if (fp_oob) {
+ fwrite(oobbuf, 1, oobsize, fp_oob);
+ if (ferror(fp_oob)) {
+ err_msg("IO error\n");
+ return -EIO;
+ }
+ }
+ else {
+ fwrite(oobbuf, 1, oobsize, fp_data);
+ if (ferror(fp_data)) {
+ err_msg("IO error\n");
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+int main (int argc, char** argv)
+{
+ int rc = -1;
+ int res = 0;
+ size_t written, read;
+ myargs args = {
+ .action = ACT_NORMAL,
+ .pagesize = PAGESIZE,
+ .padding = PADDING,
+ .fp_in = NULL,
+ .file_out_data = "",
+ .file_out_oob = "",
+ };
+
+ FILE* fp_out_data = stdout;
+ FILE* fp_out_oob = NULL;
+
+ argp_parse(&argp, argc, argv, ARGP_IN_ORDER, 0, &args);
+
+ uint8_t* buf = calloc(1, BUFSIZE);
+ if (!buf) {
+ err_quit("Cannot allocate page buffer.\n");
+ }
+
+ if (!args.fp_in) {
+ err_msg("No input image specified!\n");
+ goto err;
+ }
+
+ if (strcmp(args.file_out_data, "") != 0) {
+ fp_out_data = fopen(args.file_out_data, "wb");
+ if (fp_out_data == NULL) {
+ err_sys("Cannot open file %s for output\n",
+ args.file_out_data);
+ goto err;
+ }
+ }
+
+ if (strcmp(args.file_out_oob, "") != 0) {
+ fp_out_oob = fopen(args.file_out_oob, "wb");
+ if (fp_out_oob == NULL) {
+ err_sys("Cannot open file %s for output\n",
+ args.file_out_oob);
+ goto err;
+ }
+ }
+
+
+ while(1) {
+ read = fread(buf, 1, args.pagesize, args.fp_in);
+ if (feof(args.fp_in) && read == 0)
+ break;
+
+ if (read < args.pagesize) {
+ err_msg("Image not page aligned\n");
+ goto err;
+ }
+
+ if (ferror(args.fp_in)) {
+ err_msg("Read error\n");
+ goto err;
+ }
+
+ res = process_page(buf, args.pagesize, fp_out_data,
+ fp_out_oob, &written);
+ if (res != 0)
+ goto err;
+ }
+
+ while (written < args.padding) {
+ memset(buf, 0xff, args.pagesize);
+ res = process_page(buf, args.pagesize, fp_out_data,
+ fp_out_oob, &written);
+ if (res != 0)
+ goto err;
+ }
+
+ rc = 0;
+err:
+ free(buf);
+
+ if (args.fp_in)
+ fclose(args.fp_in);
+
+ if (fp_out_oob)
+ fclose(fp_out_oob);
+
+ if (fp_out_data && fp_out_data != stdout)
+ fclose(fp_out_data);
+
+ if (rc != 0) {
+ err_msg("Error during conversion. rc: %d\n", rc);
+ remove(args.file_out_data);
+ remove(args.file_out_oob);
+ }
+ return rc;
+}
diff --git a/ubi-utils/src/bin2nand/nandecc.c b/ubi-utils/src/bin2nand/nandecc.c
new file mode 100644
index 0000000..71660ef
--- /dev/null
+++ b/ubi-utils/src/bin2nand/nandecc.c
@@ -0,0 +1,159 @@
+/*
+ * This file contains an ECC algorithm from Toshiba that detects and
+ * corrects 1 bit errors in a 256 byte block of data.
+ *
+ * drivers/mtd/nand/nand_ecc.c
+ *
+ * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com)
+ * Toshiba America Electronics Components, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 or (at your option) any
+ * later version.
+ *
+ * This file is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this file; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * As a special exception, if other files instantiate templates or use
+ * macros or inline functions from these files, or you compile these
+ * files and link them with other works to produce a work based on these
+ * files, these files do not by themselves cause the resulting work to be
+ * covered by the GNU General Public License. However the source code for
+ * these files must still be made available in accordance with section (3)
+ * of the GNU General Public License.
+ *
+ * This exception does not invalidate any other reasons why a work based on
+ * this file might be covered by the GNU General Public License.
+ */
+
+#include "nandecc.h"
+
+/*
+ * Pre-calculated 256-way 1 byte column parity
+ */
+static const uint8_t nand_ecc_precalc_table[] = {
+ 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a,
+ 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
+ 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f,
+ 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
+ 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c,
+ 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
+ 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59,
+ 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
+ 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33,
+ 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
+ 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56,
+ 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
+ 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55,
+ 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
+ 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30,
+ 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
+ 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30,
+ 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
+ 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55,
+ 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
+ 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56,
+ 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
+ 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33,
+ 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
+ 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59,
+ 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
+ 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c,
+ 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
+ 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f,
+ 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
+ 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a,
+ 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
+};
+
+/**
+ * nand_trans_result - [GENERIC] create non-inverted ECC
+ * @reg2: line parity reg 2
+ * @reg3: line parity reg 3
+ * @ecc_code: ecc
+ *
+ * Creates non-inverted ECC code from line parity
+ */
+static void nand_trans_result(uint8_t reg2, uint8_t reg3,
+ uint8_t *ecc_code)
+{
+ uint8_t a, b, i, tmp1, tmp2;
+
+ /* Initialize variables */
+ a = b = 0x80;
+ tmp1 = tmp2 = 0;
+
+ /* Calculate first ECC byte */
+ for (i = 0; i < 4; i++) {
+ if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */
+ tmp1 |= b;
+ b >>= 1;
+ if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */
+ tmp1 |= b;
+ b >>= 1;
+ a >>= 1;
+ }
+
+ /* Calculate second ECC byte */
+ b = 0x80;
+ for (i = 0; i < 4; i++) {
+ if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */
+ tmp2 |= b;
+ b >>= 1;
+ if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */
+ tmp2 |= b;
+ b >>= 1;
+ a >>= 1;
+ }
+
+ /* Store two of the ECC bytes */
+ ecc_code[1] = tmp1;
+ ecc_code[0] = tmp2;
+}
+
+/**
+ * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for
+ * 256 byte block
+ *
+ * @dat: raw data
+ * @ecc_code: buffer for ECC
+ */
+int nand_calculate_ecc(const uint8_t *dat, uint8_t *ecc_code)
+{
+ uint8_t idx, reg1, reg2, reg3;
+ int j;
+
+ /* Initialize variables */
+ reg1 = reg2 = reg3 = 0;
+ ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
+
+ /* Build up column parity */
+ for(j = 0; j < 256; j++) {
+
+ /* Get CP0 - CP5 from table */
+ idx = nand_ecc_precalc_table[dat[j]];
+ reg1 ^= (idx & 0x3f);
+
+ /* All bit XOR = 1 ? */
+ if (idx & 0x40) {
+ reg3 ^= (uint8_t) j;
+ reg2 ^= ~((uint8_t) j);
+ }
+ }
+
+ /* Create non-inverted ECC code from line parity */
+ nand_trans_result(reg2, reg3, ecc_code);
+
+ /* Calculate final ECC code */
+ ecc_code[0] = ~ecc_code[0];
+ ecc_code[1] = ~ecc_code[1];
+ ecc_code[2] = ((~reg1) << 2) | 0x03;
+ return 0;
+}
diff --git a/ubi-utils/src/bin2nand/nandecc.h b/ubi-utils/src/bin2nand/nandecc.h
new file mode 100644
index 0000000..8ae8a66
--- /dev/null
+++ b/ubi-utils/src/bin2nand/nandecc.h
@@ -0,0 +1,11 @@
+/*
+ * NAND ecc functions
+ */
+#ifndef _NAND_ECC_H
+#define _NAND_ECC_H
+
+#include <stdint.h>
+
+extern int nand_calculate_ecc(const uint8_t *dat, uint8_t *ecc_code);
+
+#endif