ubi-utils: move ubi_jffs2_test.sh to better place

... to tests/ubi-tests/

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

1 files changed, 0 insertions, 411 deletions

diff --git a/ubi-utils/scripts/ubi_jffs2_test.sh b/ubi-utils/scripts/ubi_jffs2_test.sh
deleted file mode 100755
index 883903d..0000000
--- a/ubi-utils/scripts/ubi_jffs2_test.sh
+++ /dev/null
@@ -1,411 +0,0 @@
-#!/bin/sh
-#
-# UBI Volume creation/deletion/write/read and JFFS2 on top of UBI
-# testcases.
-#
-# Written in shell language to reduce dependencies to more sophisticated
-# interpreters, which may not be available on some stupid platforms.
-#
-# Author: Frank Haverkamp <haver@vnet.ibm.com>
-#
-# 1.0 Initial version
-# 1.1 Added fixup for delayed device node creation by udev
-#     This points to a problem in the tools, mabe in the desing
-#     Tue Oct 31 14:14:54 CET 2006
-#
-
-VERSION="1.1"
-
-export PATH=$PATH:/bin:~/bin:/usr/local/bin:/home/dedekind/work/prj/ubi/tools/flashutils/bin/
-
-ITERATIONS=250
-ALIGNMENT=2048
-
-UBIMKVOL="ubimkvol -a $ALIGNMENT"
-UBIRMVOL=ubirmvol
-UBIUPDATEVOL=ubiupdatevol
-
-SIZE_512K=524288
-SIZE_1M=1310720
-
-MINVOL=10
-MAXVOL=12
-
-TLOG=/dev/null
-
-#
-# To have a standardized output I define the following function to be
-# used when a test was ok or when it failed.
-#
-failed ()
-{
-    echo "FAILED"
-}
-
-passed ()
-{
-    echo "PASSED"
-}
-
-#
-# Print sucess message. Consider to exit with zero as return code.
-#
-exit_success ()
-{
-    echo "SUCCESS"
-    exit 0
-}
-
-#
-# Print failure message. Consider to exit with non zero return code.
-#
-exit_failure ()
-{
-    echo "FAILED"
-    exit 1
-}
-
-###############################################################################
-#
-# START
-#
-###############################################################################
-
-fix_sysfs_issue ()
-{
-    echo "*** Fixing the sysfs issue with the /dev nodes ... "
-
-    minor=0
-    major=`grep ubi0 /proc/devices | sed -e 's/\(.*\) ubi0/\1/'`
-
-    rm -rf /dev/ubi0
-    mknod /dev/ubi0 c $major 0
-
-    for minor in `seq $MINVOL $MAXVOL`; do
-	echo " -> mknod /dev/ubi0_$minor c $major $(($minor + 1))"
-        rm -rf /dev/ubi0_$minor
-        mknod /dev/ubi0_$minor c $major $(($minor + 1))
-    done
-    passed
-}
-
-#
-# FIXME Udev needs some time until the device nodes are created.
-#       This will cause trouble if after ubimkvol an update attempt
-#       is started immediately, since the device node is not yet
-#       available. We should either fix the tools with inotify or
-#       other ideas or figure out a different way to solve the problem
-#       e.g. to use ubi0 and make the volume device nodes obsolete...
-#
-udev_wait ()
-{
-    echo -n "FIXME Waiting for udev to create/delete device node "
-    grep 2\.6\.5 /proc/version > /dev/null
-    if [ $? -eq "0" ]; then
-	for i in `seq 0 5`; do
-	    sleep 1; echo -n ".";
-	done
-	echo " ok"
-    fi
-}
-
-# delete_volume - Delete a volume. If it does not exist, do not try
-#                 to delete it.
-# @id:     volume id
-#
-delete_volume ()
-{
-    volume=$1
-
-    ### FIXME broken sysfs!!!!
-    if [ -e /sys/class/ubi/$volume -o \
-	 -e /sys/class/ubi/ubi0/$volume -o \
-	 -e /sys/class/ubi/ubi0_$volume ]; then
-
-	echo "*** Truncate volume if it exists ... "
-	echo "    $UBIUPDATEVOL -d0 -n$volume -t"
-	$UBIUPDATEVOL -d0 -n$volume -t
-	if [ $? -ne "0" ] ; then
-	    exit_failure
-	fi
-	passed
-
-	echo -n "*** Delete volume if it exists ... "
-	$UBIRMVOL -d0 -n$volume
-	if [ $? -ne "0" ] ; then
-	    exit_failure
-	fi
-	passed
-	# udev_wait
-    fi
-}
-
-# writevol_test - Tests volume creation and writing data to it.
-#
-# @volume:  Volume number
-# @size:    Size of random data to write
-# @type:    Volume type static or dynamic
-#
-writevol_test ()
-{
-    volume=$1
-    size=$2
-    type=$3
-
-    echo "*** Write volume test with size $size"
-
-### Make sure that volume exist, delete existing volume, create new
-
-    delete_volume $volume
-
-    echo "*** Try to create volume"
-    echo "    $UBIMKVOL -d0 -n$volume -t$type -NNEW$volume -s $size ... "
-    $UBIMKVOL -d0 -n$volume -t$type -N"NEW$volume" -s $size
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-    udev_wait
-
-### Try to create same volume again
-    echo -n "*** Try to create some volume again, this must fail ... "
-    $UBIMKVOL -d0 -n$volume -t$type -N"NEW$volume" -s $size
-    if [ $? -eq "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-### Now create test data, write it, read it, compare it
-    echo -n "*** Create test data ... "
-    dd if=/dev/urandom of=testdata.bin bs=$size count=1
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-    echo "*** Now writing data to volume ... "
-    echo "    $UBIUPDATEVOL -d0 -n$volume testdata.bin"
-    ls -l testdata.bin
-    $UBIUPDATEVOL -d0 -n$volume testdata.bin
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-    echo "*** Download data with dd bs=1 ... "
-    dd if=/dev/ubi0_$volume of=readdata.bin bs=$size count=1
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-    echo -n "*** Comparing data ... "
-    cmp readdata.bin testdata.bin
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-    echo -n "*** Now truncate volume ... "
-    $UBIUPDATEVOL -d0 -n$volume -t
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-}
-
-jffs2_torture ()
-{
-    cat /dev/null > TLOG
-
-    echo "*** Torture test ... "
-
-    for i in `seq $iterations`; do
-	dd if=/dev/urandom of=test.bin bs=$i count=1 2>> $TLOG
-	if [ $? -ne "0" ] ; then
-	    echo "Testing $i byte (dd if=/dev/urandom of=foo bs=$i count=1) ... "
-	    exit_failure
-	fi
-	#passed
-
-	dd if=test.bin of=new.bin bs=$i count=1 2>> $TLOG
-	if [ $? -ne "0" ] ; then
-	    echo "dd if=test.bin of=new.bin bs=$i count=1 2>> $TLOG"
-	    exit_failure
-	fi
-	#passed
-
-	#echo "Comparing files ... "
-	cmp test.bin new.bin
-	dd if=test.bin of=new.bin bs=$i count=1 2>> $TLOG
-	if [ $? -ne "0" ] ; then
-	    exit_failure
-	fi
-	#passed
-	#echo -n "."
-    done
-
-    echo -n "step0:ok "
-
-    for i in `seq $iterations`; do
-	dd if=/dev/urandom of=foo bs=$i count=1 2>> $TLOG
-	if [ $? -ne "0" ] ; then
-	    echo "Testing $i byte (dd if=/dev/urandom of=foo bs=$i count=1) ... "
-	    exit_failure
-	fi
-	#passed
-    done
-
-    echo -n "step1:ok "
-
-    for i in `seq $iterations`; do
-	dd if=/dev/zero of=foo bs=1 count=$i 2>> $TLOG
-	if [ $? -ne "0" ] ; then
-	    echo "Testing $i byte (dd if=/dev/zero of=foo bs=1 count=$i) ... "
-	    exit_failure
-	fi
-	#passed
-    done
-
-    echo -n "step2:ok "
-
-    for i in `seq $iterations`; do
-	dd if=/dev/zero of=foo bs=$i count=16 2>> $TLOG
-	if [ $? -ne "0" ] ; then
-	    echo "Testing $i byte (dd if=/dev/zero of=foo bs=$i count=1024) ... "
-	    exit_failure
-	fi
-	#passed
-    done
-
-    echo -n "step3:ok "
-
-    passed
-}
-
-# writevol_test - Tests volume creation and writing data to it.
-#
-# @volume:  Volume number
-# @size:    Size of random data to write
-# @type:    Volume type static or dynamic
-#
-jffs2_test ()
-{
-    name=$1
-    iterations=$2
-    directory=`pwd`
-
-    ### Setup
-    ulimit -c unlimited
-
-    echo -n "*** Create directory /mnt/$name ... "
-    mkdir -p /mnt/$name
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-    echo -n "*** mount -t jffs2 mtd:$name /mnt/$name ... "
-    mount -t jffs2 mtd:$name /mnt/$name
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-    echo -n "*** change directory ... "
-    cd /mnt/$name
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-    ls
-    echo "*** list directory ... "
-    ls -la
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-    ### Torture
-    echo -n "*** touch I_WAS_HERE ... "
-    touch I_WAS_HERE
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-    jffs2_torture
-
-    echo "*** list directory ... "
-    ls -la
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-    ### Cleanup
-    echo -n "*** go back ... "
-    cd $directory
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-    ### Still mounted, ubiupdatevol must fail!
-
-    echo -n "*** $UBIUPDATEVOL -d0 -n$volume -t must fail! ..."
-    $UBIUPDATEVOL -d0 -n$volume -t
-    if [ $? -eq "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-    echo -n "*** umount /mnt/$name ... "
-    umount /mnt/$name
-    if [ $? -ne "0" ] ; then
-	exit_failure
-    fi
-    passed
-
-    return
-}
-
-echo "***********************************************************************"
-echo "*           UBI JFFS2 Testing starts now ...                          *"
-echo "*                                 Good luck!                          *"
-echo "***********************************************************************"
-echo "VERSION: $VERSION"
-
-# Set to zero if not running on example hardware
-grep ubi /proc/devices > /dev/null
-if [ $? -ne "0" ]; then
-    echo "No UBI found in /proc/devices! I am broken!"
-    exit_failure
-fi
-
-# Set to zero if not running on example hardware
-grep 1142 /proc/cpuinfo > /dev/null
-if [ $? -eq "0" ]; then
-    echo "Running on example hardware"
-    mount -o remount,rw / /
-    sleep 1
-    fix_sysfs_issue
-else
-    echo "Running on Artems hardware"
-fi
-
-for volume in `seq $MINVOL $MAXVOL`; do
-    echo -n "************ VOLUME $volume NEW$volume "
-    echo "******************************************"
-    writevol_test $volume $SIZE_1M dynamic
-    jffs2_test NEW$volume $ITERATIONS
-    delete_volume $volume
-done
-
-echo "***********************************************************************"
-echo "*               Congratulations, no errors found!                     *"
-echo "*              Have fun with your cool UBI system!                    *"
-echo "***********************************************************************"
-
-exit_success