Integrate tests into autotools build system

Add automake files for the test binaries. If configured to do so,
install the test binaries to libexec/mtd-utils and use autoconf to
fix the paths in the test scripts.

Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>

1 files changed, 0 insertions, 212 deletions

diff --git a/tests/ubi-tests/stress-test.sh b/tests/ubi-tests/stress-test.sh
deleted file mode 100755
index a150495..0000000
--- a/tests/ubi-tests/stress-test.sh
+++ /dev/null
@@ -1,212 +0,0 @@
-#!/bin/sh -euf
-
-srcdir="$(readlink -ev -- ${0%/*})"
-PATH="$srcdir:$srcdir/../..:$PATH"
-
-fatal()
-{
-	echo "Error: $1" 1>&2
-	exit 1
-}
-
-usage()
-{
-	cat 1>&2 <<EOF
-Stress-test an UBI device. This test is basically built on top of
-'runtests.sh' and runs it several times for different configurations.
-
-The nandsim and mtdram drivers have to be compiled as kernel modules.
-
-Usage:
-  ${0##*/} run
-EOF
-}
-
-cleanup_handler()
-{
-	local ret="$1"
-	rmmod ubi >/dev/null 2>&1 ||:
-	rmmod nandsim >/dev/null 2>&1 ||:
-	rmmod mtdram >/dev/null 2>&1  ||:
-
-	# Below is magic to exit with correct exit code
-	if [ "$ret" != "0" ]; then
-		trap false EXIT
-	else
-		trap true EXIT
-	fi
-}
-trap 'cleanup_handler $?' EXIT
-trap 'cleanup_handler 1' HUP PIPE INT QUIT TERM
-
-# Find MTD device number by pattern in /proc/mtd
-# Usage: find_mtd_device <pattern>
-find_mtd_device()
-{
-	printf "%s" "$(grep "$1" /proc/mtd | sed -e "s/^mtd\([0-9]\+\):.*$/\1/")"
-}
-
-# Just print parameters of the 'run_test' funcion in a user-friendly form.
-print_params()
-{
-	local module="$1";    shift
-	local size="$1";      shift
-	local peb_size="$1";  shift
-	local page_size="$1"; shift
-	local vid_offs="$1";  shift
-	local fastmap="$1";   shift
-
-	printf "%s" "$module: ${size}MiB, PEB size ${peb_size}KiB, "
-	if [ "$module" = "nandsim" ]; then
-		printf "%s" "page size ${page_size}KiB, VID offset $vid_offs, "
-	fi
-	printf "%s\n" "fastmap $fastmap"
-}
-
-# Load mtdram with specified size and PEB size
-# Usage: load_mtdram <flash size> <PEB size>
-# 1. Flash size is specified in MiB
-# 2. PEB size is specified in KiB
-load_mtdram()
-{
-	local size="$1";     shift
-	local peb_size="$1"; shift
-
-	size="$(($size * 1024))"
-	modprobe mtdram total_size="$size" erase_size="$peb_size" ||
-		echo "Error: cannot load $size MiB mtdram"
-}
-
-print_separator()
-{
-	echo "======================================================================"
-}
-
-# Run a test on nandsim or mtdram with certain geometry.
-# Usage: run_test <nandsim|mtdram> <flash size> <PEB size> \
-#                 <Page size> <VID hdr offs> <enable fastmap>
-# 1. Simulator type (nandsim or mtdram)
-# 2. Flash size is specified in MiB
-# 3. PEB size is specified in KiB
-# 4. Page size is specified in bytes (mtdram ingores this)
-# 5. VID header offset (mtdram ingores this)
-# 6. Whether fast-map should be enabled (pass "enabled" or "disabled")
-run_test()
-{
-	local module="$1";
-	local size="$2";
-	local peb_size="$3";
-	local page_size="$4";
-	local vid_offs="$5"
-	local fastmap="$6";
-	local fm_supported fm_param mtdnum
-
-	print_separator
-
-	# Check if fastmap is supported by UBI
-	if modinfo ubi | grep -q fm_auto; then
-		fm_supported="yes"
-	else
-		fm_supported="no"
-	fi
-
-	if [ "$fastmap" = "enabled" ]; then
-		fm_param=
-	elif [ "$fm_supported" = "yes" ]; then
-		fastmap="disabled"
-		fm_param="fm_auto"
-	else
-		echo "Fastmap is not supported, skip"
-		return 0
-	fi
-
-	if [ "$module" = "nandsim" ]; then
-		print_params "$@"
-
-		load_nandsim.sh "$size" "$peb_size" "$page_size" ||
-			echo "Cannot load nandsim, test skipped"
-
-		mtdnum="$(find_mtd_device "$nandsim_patt")"
-	elif [ "$module" = "mtdram" ]; then
-		print_params "$@"
-
-		load_mtdram "$size" "$peb_size"
-
-		mtdnum="$(find_mtd_device "$mtdram_patt")"
-	else
-		fatal "$module is not supported" ||
-			echo "Cannot load nandsim, test skipped"
-	fi
-
-	modprobe ubi mtd="$mtdnum,$vid_offs" $fm_param
-	runtests.sh /dev/ubi0 ||:
-
-	sudo rmmod ubi
-	sudo rmmod "$module"
-}
-
-if [ "$#" -lt 1 ] || [ "$1" != "run" ]; then
-	usage
-	exit 1
-fi
-
-# Make sure neither mtdram nor nandsim are used
-nandsim_patt="NAND simulator"
-mtdram_patt="mtdram test device"
-if [ -e /proc/mtd ]; then
-	! grep -q "$nandsim_patt" /proc/mtd ||
-		fatal "the nandsim driver is already used"
-	! grep -q "$mtdram_patt" /proc/mtd ||
-		fatal "the mtdram driver is already used"
-fi
-
-rmmod ubi >/dev/null 2>&1 ||:
-
-for module in "mtdram" "nandsim"; do
-	for fm in "enabled" "disabled"; do
-		for vid_factor in 1 0; do
-			print_separator
-			print_separator
-			print_separator
-			echo "Test on $module, fastmap $fm, VID header offset factor $vid_factor"
-			print_separator
-			print_separator
-
-			pg_size="512"
-			vid_offs="$(($pg_size * $vid_factor))"
-
-			run_test "$module" "16"  "16" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "32"  "16" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "64"  "16" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "128" "16" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "256" "16" "$pg_size" "$vid_offs" "$fm"
-
-			pg_size="2048"
-			vid_offs="$(($pg_size * $vid_factor))"
-
-			run_test "$module" "64"   "64" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "128"  "64" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "256"  "64" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "512"  "64" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "1024" "64" "$pg_size" "$vid_offs" "$fm"
-
-			run_test "$module" "64"   "128" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "128"  "128" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "256"  "128" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "512"  "128" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "1024" "128" "$pg_size" "$vid_offs" "$fm"
-
-			run_test "$module" "64"   "256" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "128"  "256" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "256"  "256" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "512"  "256" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "1024" "256" "$pg_size" "$vid_offs" "$fm"
-
-			run_test "$module" "64"   "512" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "128"  "512" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "256"  "512" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "512"  "512" "$pg_size" "$vid_offs" "$fm"
-			run_test "$module" "1024" "512" "$pg_size" "$vid_offs" "$fm"
-		done
-	done
-done