init.git/.gitignore, branch v0.5Pygos init daemonhttps://git.infraroot.at/pygos/init.git/atom?h=v0.52018-07-23T18:20:27+00:00Add nftables service2018-07-23T18:20:27+00:00David Oberhollenzerdavid.oberhollenzer@tele2.at2018-07-23T18:20:27+00:00urn:sha1:e15208097cf3e97c8165536c2005e53961227621
Signed-off-by: David Oberhollenzer <david.oberhollenzer@tele2.at>
Add swclock service for systems without a hardware RTC2018-07-22T19:38:14+00:00David Oberhollenzerdavid.oberhollenzer@tele2.at2018-07-22T18:55:34+00:00urn:sha1:c3249ae0c9777e8d16c90ce1ca441e90ad4fcf7b
Some systems don't have a hardware real time clock and don't know the time
after bootin. An obvious soulution for this is to use time from an ntp
server. Unfortunately that requires domain name resolution, which resolvers
like unbound won't do for us, if the DNSSEC certificates aren't valid, which
they aren't if we start out with a time around 1970-1-1.
The "software clock" service tries to provide a workaround by restoring a
reasonably valid time from a backup file during boot, which we update when
shuting down. If we wan't a more correct time, we have to update it from
NTP in between.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@tele2.at>
Add service file for hostapd2018-07-20T18:58:34+00:00David Oberhollenzerdavid.oberhollenzer@tele2.at2018-07-20T15:37:42+00:00urn:sha1:8718c31928792c5d092eeca3d656924874a38aa1
Signed-off-by: David Oberhollenzer <david.oberhollenzer@tele2.at>
Add a module auto loading service2018-07-18T15:56:09+00:00David Oberhollenzerdavid.oberhollenzer@tele2.at2018-07-17T20:39:27+00:00urn:sha1:4b047ad61e53066e6c5d96f0f79ea3f194938c84
Signed-off-by: David Oberhollenzer <david.oberhollenzer@tele2.at>
Add ifdown service2018-07-17T16:02:46+00:00David Oberhollenzerdavid.oberhollenzer@tele2.at2018-07-17T16:02:46+00:00urn:sha1:258848ace2bcecf1ae6c3b7b433805b18fbd37d0
Add a service file and helper script to shut down all network interfaces
during shutdown or reboot.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@tele2.at>
Add utility for producing syslog message from the shell2018-06-11T17:45:42+00:00David Oberhollenzerdavid.oberhollenzer@tele2.at2018-06-06T12:59:12+00:00urn:sha1:d9f883f2151a026d25277d57d56aa045417dd3bb
This can can be used by shell scripts to produce syslog messages,
as well as aiding in debugging the usyslogd daemon.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@tele2.at>
Add minimalistic syslog daemon2018-06-11T17:45:42+00:00David Oberhollenzerdavid.oberhollenzer@tele2.at2018-06-02T14:20:02+00:00urn:sha1:f52c7ea9d045db3a1f313f92ef786cbb58594a50
For now this daemon simply dumps all syslog messages into seperate log
files and doesn't do much parsing. Since the messages are readable ASCII
anyway, this should not be to much of a problem and sufficient for
debugging.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@tele2.at>
Add service and helper script for static network configuration2018-04-28T11:52:01+00:00David Oberhollenzerdavid.oberhollenzer@tele2.at2018-04-27T20:38:01+00:00urn:sha1:a22a212d3abdfbce445228c0cdce39a363cc666b
After interface renaming is done, perform the following actions:
- Configure each interface for which we have a configuration file
- Configuration file contains lines that we pass directly to iproute2
- Configure static routing in a similar fashion
- Set the configured interfaces up
Signed-off-by: David Oberhollenzer <david.oberhollenzer@tele2.at>
Add optional script for persistent network interface renaming2018-04-27T09:28:46+00:00David Oberhollenzerdavid.oberhollenzer@tele2.at2018-04-26T18:34:14+00:00urn:sha1:0ded4765344b6360cf4f030909d5bbe736a1a584
Add a new service that runs a small helper script that applies a consistent,
deterministic naming pattern to all interfaces, based on their mac address.
A configuration file with wild card pattern matching can be used for
determining names. By default, this is disabled.
Also, this script is Linux specific.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@tele2.at>
Add helper program for running services2018-04-22T11:41:18+00:00David Oberhollenzerdavid.oberhollenzer@tele2.at2018-04-21T23:02:27+00:00urn:sha1:59731dd69bb4be66c721b3de66fb2ab80bec3e7e
We no longer need to keep entire scripts in init program (i.e. saving space)
and reduce the code and complexity of the init program.
The runsvc tool can later be extended to do more complex child setup, such
as configuring namespaces or seccomp without adding complexity or memory
footprint to init.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@tele2.at>