From 86dd9696d3a1acb036d65909d93d73455b8aed3a Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 19 Feb 2008 14:54:17 +0200 Subject: Revert ubi-tools changes Restore ubi tools to their "original" state, which means to the state they were before I stareted cleaning them up. Instead, create a "new-utils" subdirectory and move my work there. Signed-off-by: Artem Bityutskiy --- ubi-utils/README | 236 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 236 insertions(+) create mode 100644 ubi-utils/README (limited to 'ubi-utils/README') diff --git a/ubi-utils/README b/ubi-utils/README new file mode 100644 index 0000000..d976a76 --- /dev/null +++ b/ubi-utils/README @@ -0,0 +1,236 @@ +README +====== + +The programs and libraries in this directory provide a tool-chain to +generate binary data for embedded systems which can be flashed either +by a hardware flash programmer, e.g. JTAG debugger, or on the target +system directly using pfiflash, or ubimkvol, ubirmvol, ubiwritevol. + +The latter is the case when there is already Linux running which has +build in UBI support. + +Authors: Oliver Lohmann + Frank Haverkamp + Andreas Arnez + +mkpfi - tool for flash content generation in PFI + format +pfi2bin - conversion tool to transfer a PFI file into a + binary image +pfiflash - tool to update the embedded systems flash using + pfi files created by mkpfi +libbootenv - library for boot-parameter processing +libpfi - library for partial flash image (PFI) creation + and handling +ubigen - tool to create binary UBI images e.g. for a + jtag flashing tool +nandimg - tool to add OOB data to binary images intended + for NAND flash systems +ubilib - UBI library + +!!! NOTICE !!! +If you execute ./configure in the top_level directory the helper Makefile +gets overwritten. Thats actually no problem, but be aware of that. + +1. Build Process + +1.1 Build, install and forget + o Build all and everything + $make all (takes a while, builds ppc and x86 binaries/libs) + o Installation: + $make install + o Uninstallation: + $make uninstall + + o x86 only would be: + $make x86 && make install_x86 + +1.2 Usage for a developer + + 1.2.1 The build process in detail + + o If you've checked out the sources from the CVS repository you'll find a + directory setup like this: + + flashutils/ + -rw-r--r-- 1 olli olli 1.3K Mar 14 11:53 Makefile + -rw-r--r-- 1 olli olli 1.9K Mar 14 10:50 Makefile.am + -rwxr-xr-x 1 olli olli 265 Mar 9 00:47 bootstrap + -rw-r--r-- 1 olli olli 1.1K Mar 9 16:55 configure.ac + drwxr-xr-x 2 olli olli 4.0K Mar 9 00:28 doc + drwxr-xr-x 2 olli olli 4.0K Mar 14 11:56 inc + drwxr-xr-x 2 olli olli 4.0K Mar 14 11:56 lib + drwxr-xr-x 17 olli olli 4.0K Mar 13 16:50 src + + o To generate the initial build templates you have to call the bootstrap + script: + $ ./bootstrap + o Create a directory for the target platform + $ mkdir build_x86 + o Descend into the directory and call the top-level configure script + with the desired options. + $ cd build_x86 + $ ../configure --prefix=/usr/local [...] + o Now you'll find a directory structure like this: + + flashutils/build_x86/ + -rw-r--r-- 1 olli olli 47K Mar 14 13:33 Makefile + -rw-r--r-- 1 olli olli 33K Mar 14 13:33 config.log + -rwxr-xr-x 1 olli olli 38K Mar 14 13:33 config.status + drwxr-xr-x 2 olli olli 4.0K Mar 14 13:33 inc + drwxr-xr-x 3 olli olli 4.0K Mar 14 13:33 lib + -rwxr-xr-x 1 olli olli 202K Mar 14 13:33 libtool + + o The config.guess script can be used to update the Makefiles in the + target directory after a change of the top-level template files + (i.e. the Makefile.in files). + $ ./config.guess + o To compile everything for this platform just invoke make in + flashutils/build_x86: + $ make + or from toplevel: + $ make -C ./build_x86 + o The build process creates a new directory "bin": + flashutils/build_x86/ + [...] + drwxr-xr-x 3 olli olli 4.0K Mar 14 13:41 bin + [...] + + This directory contains all binary files which will be installed + by make install, e.g.: + + flashutils/build_x86/bin/ + -rwxr-xr-x 1 olli olli 7.2K Mar 14 13:41 bin2nand + -rwxr-xr-x 1 olli olli 15K Mar 14 13:41 mkbootenv + -rwxr-xr-x 1 olli olli 16K Mar 14 13:41 pddcustomize + -rwxr-xr-x 1 olli olli 36K Mar 14 13:41 pfi2bin + -rwxr-xr-x 1 olli olli 6.8K Mar 14 13:41 pfiflash + -rwxr-xr-x 1 olli olli 5.0K Mar 14 13:41 ubicrc32 + -rwxr-xr-x 1 olli olli 13K Mar 14 13:41 ubigen + -rwxr-xr-x 1 olli olli 6.3K Mar 14 13:41 ubimirror + + + 1.2.2 Modifying and Adding Sources + + o There is a dedicated directory which contains all source code + of the flashutils package, e.g.: + + flashutils/src/ + drwxr-xr-x 2 olli olli 4.0K Mar 13 11:42 libbootenv + drwxr-xr-x 2 olli olli 4.0K Mar 13 11:42 liberror + drwxr-xr-x 2 olli olli 4.0K Mar 13 16:48 mkpfi + drwxr-xr-x 2 olli olli 4.0K Mar 13 16:12 pddcustomize + + + + The prefix "lib" is used to mark directories as part of a convenience + library. Binaries have no special prefix. + + o How to add sources? + + Just create a new directory at flashutils/src/, e.g.: + + For a binary: + $ mkdir rider + $ cd rider + $ vi rider.c + /* do sth with that file... */ + + For a convenience library (as well as for "normal libs") + $ mkdir libworld + $ cd libworld + $ vi world.c + /* do sth with that file... */ + + o How to register sources in the build process (for binaries)? + + You have to register your sources at the top-level automake Makefile: + + In directory flashutils/ + $ vi Makefile.am + + Binaries have to be registered at "bin_PROGRAMS", e.g.: + bin_PROGRAMS = bin/pddcustomize \ + bin/rider + + Add the rule how the binary is assembled, e.g.: + bin_pddcustomize_SOURCES = \ + $(top_srcdir)/src/pddcustomize/pddcustomize.c + bin_pddcustomize_LDADD = \ + $(top_builddir)/lib/libbootenv.la \ + $(top_builddir)/lib/liberror.la + + bin_rider_SOURCES = \ + $(top_srcdir)/src/rider/rider.c + + This example reflects a simple build process for "rider". "rider" + is built without any other dependencies or convenience libraries. + The example for pddcustomize is a bit more complicated. + "_LDADD" adds some convenience libraris into the link process of + "pddcustomize". Imagine, that your "rider" has common code + with "dragon_bin" which is held in a library called "libworld". + The build rules would like like the following: + + bin_rider_SOURCES = \ + $(top_srcdir)/src/rider/rider.c + bin_rider_LDADD = \ + $(top_builddir)/lib/libworld.la + + bin_dragon_SOURCES = \ + $(top_srcdir)/src/dragon_bin/dragon_bin.c + bin_dragon_LDADD = \ + $(top_builddir)/lib/libworld.la + + Don't forget to add "dragon" to "bin_PROGRAMS"! + Don't forget to set the build rule for the "libworld" itself! + This is documented in the next section. + + + o How to register sources in the build process (for libraries)? + + Until now we didn't care about the build process of "libworld". + Libraries are handled special in this build process because + they are handled as "modules", i.e. they are able to be built + without building the binaries in the same step. Additionally, + it is possible to assemble complex libraries out of simple ones. + That especially makes sense if you want to export (install) a + library on a system which uses some common code and makes + some adoptions for usability and presents a comfortable interface to + the user (see libpfiflash in the sources for an example). + + o Registering "libworld" as convenience library. + + Instead of editing the "Makefile.am" in "flashtools/", we have to + edit now the "Makefile.am" in "flashtools/lib/": + + noinst_LTLIBRARIES = libworld.la + + libworld_la_SOURCES = $(top_srcdir)/src/libworld/world.c + + o Registering "libworld" as library which gets installed. + + lib_LTLIBRARIES = libworld.la + libworld_la_SOURCES = $(top_srcdir)/src/libworld/world.c + libworld_la_LDFLAGS = -no-undefined -version-info 0:0:0 + + o Header files + + All header files are stored at "flashutils/inc", regardless + if convenience library or not. + + If you want to export headers you have to specify this in the Makefile.am + located at "flashutils/inc", e.g. (this should not be done + for convenience libraries): + + nobase_include_HEADERS = world.h + + + +Appendix + +A.1. FAQ + + Q How to call configure to setup a cross-platform build? + A $ ./configure --build=i686-pc-linux-gnu --host=ppc-linux \ + --prefix=/opt/.../ppcnf/crossroot/ \ + --exec-prefix=/opt/..../ppcnf/crossroot/usr -- cgit v1.2.3